Results 1 to 2 of 2

Thread: NTFS Partition backups with Knoppix Live CD

  1. #1

    NTFS Partition backups with Knoppix Live CD

    I'm trying to use a Knoppix Live CD to make backup copies of a Windows NTFS partition using dd. I need a bit of help. I'm pretty familiar with Unix, but am new to Linux.

    The background of my problem is as follows: When installing Windows on a single hard drive, my normal procedure is to create one partition for the operating system, and a second extended NTFS partition called DATA. Normally, I use a bootable Norton Ghost disk to make backup images of the operating system partition as I proceed through the installation process. I store the ghost images of the operating system partition on the DATA partition. So, for example, I'll install windows XP on the operating system partition and make an image called XP0, which I store on the DATA partition. Next, I'll install all the hardware drivers and make an image called XP1. Then I'll install service pack 2 and make image XP2. Next I install windows updates and create image XP3, and so forth. I do this in case, for example, a windows update hoses the operating system, I can restore image XP2 and move forward, without reinstalling everything from scratch.

    I'm trying to accomplish the same process using dd from a Knoppix Live CD. I created the CD from this iso:

    KNOPPIX_V6.0-ADRIANE_V1.1CD-2009-01-27-EN.iso

    My hard drive is a Western Digital 250 GB SATA drive. My motherboard is an MSI K9N2 SLI Platinum. I've installed Windows XP and created the NTFS extended partition called DATA. Here's what I'm doing to try to make the first backup image:

    1) Boot off Knoppix Live CD
    2) Choose option 9 (shell) to get a command prompt
    3) Gain SuperUser access by typing:
    sudo -s
    4) I type
    ls /mnt
    and I deduce that the operating system partition is /dev/sda1 and the extended partition is /dev/sda5.
    5) I try this command:
    dd if=/dev/sda1 of=/dev/sda5/xp0.dat
    6) I get this error:
    dd: opening "/dev/sda5/xp0.dat" not a directory

    Do I need to mount /dev/sda5 first? Or do I mount /dev/sda1? Or both? Or am I doing something else stupid?

    Any help would be greatly appreciated.

  2. #2
    Senior Member registered user
    Join Date
    Oct 2003
    Location
    N42.41 W73 and change
    Posts
    401
    Try replacing:

    dd if=/dev/sda1 of=/dev/sda5/xp0.dat
    with

    Code:
    dd if=/dev/sda1 of=/mnt/sda5/xp0.dat
    or wherever mount shows /dev/sda5 is mounted (might be /media)
    see also

    http://wiki.linuxquestions.org/wiki/Dd#Create_a_backup

    HTH

Similar Threads

  1. Can I burn files from an ntfs partition using Knoppix live
    By Drake in forum MS Windows & New to Linux
    Replies: 4
    Last Post: 06-19-2005, 02:11 AM
  2. ntfs.sys file: Writing on ntfs partition version 3.8.1
    By zette in forum MS Windows & New to Linux
    Replies: 2
    Last Post: 05-04-2005, 03:03 PM
  3. Knoppix and NTFS... will I need a shared partition?
    By Chefren in forum Hdd Install / Debian / Apt
    Replies: 1
    Last Post: 01-29-2005, 09:21 AM
  4. Backup NTFS partition with Knoppix live cd?
    By OCedHrt in forum General Support
    Replies: 6
    Last Post: 06-17-2004, 05:35 AM
  5. How to Image an NTFS partition with Knoppix
    By wooac in forum General Support
    Replies: 2
    Last Post: 04-13-2004, 11:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR picture

Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR

$95.20



Dell PowerEdge M640 Blade Barebone Server Dell P/N: HHB006 Tested Working picture

Dell PowerEdge M640 Blade Barebone Server Dell P/N: HHB006 Tested Working

$149.99



Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 2.8ghz 20-Cores | 128GB picture

Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 2.8ghz 20-Cores | 128GB

$149.99



Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric picture

Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric

$174.99



Dell Poweredge C6400 24x 2.5’’ 2x 2400W 4x C6420 Nodes H330 | 2x SFP | 8x Trays picture

Dell Poweredge C6400 24x 2.5’’ 2x 2400W 4x C6420 Nodes H330 | 2x SFP | 8x Trays

$799.99



HPE PROLIANT BL460C GEN 9 813198-B21 2.5

HPE PROLIANT BL460C GEN 9 813198-B21 2.5"x2 Server Blade SEE NOTES

$21.08



Datto S4P10 1U Blade Rack Server Intel Xeon D-2143IT 2.20GHz 48GB DDR4 4-Bay PSU picture

Datto S4P10 1U Blade Rack Server Intel Xeon D-2143IT 2.20GHz 48GB DDR4 4-Bay PSU

$197.76



Dell PowerEdge FX2 FX2s Server 10GbE CMC Blade Enclosure Chassis picture

Dell PowerEdge FX2 FX2s Server 10GbE CMC Blade Enclosure Chassis

$274.99



AS IS READ DESCRIP. Supermicro SuperServer 6026TT-HIBQRF 12-Bay 4x X8DTT-HIBQF picture

AS IS READ DESCRIP. Supermicro SuperServer 6026TT-HIBQRF 12-Bay 4x X8DTT-HIBQF

$215.00



Dell Poweredge VRTX 25Bay 2.5

Dell Poweredge VRTX 25Bay 2.5" 2x PERC 8, 2xCMC, I/O 1GB Pass Through, 4x PS

$578.08