One additional point: I saw a user with a similar problem that was fixed by using Knoppix ver. 5.3.1. The latest I can find on any mirror is 5.3. Knopper.net lists 5.3 but I can't find it.
Kirk
I saw a thread similar to this, but have additional questions...I am new to this forum. Some background: The first time I ran Knoppix Live CD everything worked like a charm, and I was able to recover some data from a non-booting WinXP system. I needed to step away from the system and so I shut everything down. When I returned, it boots into the Knoppix desktop just fine, but does not show either of the hard drives on the desktop.
When it goes through the Knoppix boot process, it finds the drives just fine, lists them by name and so on. It lists the drives as hdc and hdd (in the command line-like boot process), and also lists the two DVD drives on the system (hda and hdb). But I can't see them on the DESKTOP. I can see a USB external drive on the desktop and the Knoppix CD. I did not change anything - permissions, ownership, nothing - when I booted either time.
Can anyone suggest possible solutions? In reading other posts, users mentioned including a log to help troubleshoot. If that would help, please give me specific instructions on how to find the log.
Many thanks,
Kirk-out
One additional point: I saw a user with a similar problem that was fixed by using Knoppix ver. 5.3.1. The latest I can find on any mirror is 5.3. Knopper.net lists 5.3 but I can't find it.
Kirk
I don't know the answer to your original problem. You didn't try to write to that hard drive, did you? As long as you didn't there is no good reason that I know that you would no longer get the partitions. i would try again after a complete power down. I also wonder why the hard drive is on the secondary IDE controller and the optical drive is on the primary, this is backwards from the normal way systems are usually set up. I don't have a good reason why you should change your configuration but then again I don't know why it's not working, so you might want to join the rest of us who put the hard drives on the primary IDE controller and see if that makes a difference.
As to 5.3 and 5.3.1 , 5.3 was never officially released on the Internet, only 5.3.1. I never use the mirrors any longer, and I can't say what you'll find there. But I very strongly advise that if you download 5.3.1 that you get it with BitTorrent, not from a mirror. I've seen way too many bad mirror downloads with Knoppix (nothing else gives me a problem, but Knoppix mirrors mess up about 50% of the time). BitTorrent is highly reliable and much faster than the mirrors when properly configured. See the Get Knoppix link near the top of this page for details. But one more thing, you mentioned that you have the 5.1.x CD. There is no official CD version of 5.3.x released, just a DVD version. So if you can't use a DVD version, stick with 5.1.1.

Fujinet 1.7.1 Atari 400 800 800XL 130XE 65XE XEGS Assembled, Tested, Working
$99.99
Atari 130 XE/Atari 1050 Bundle W/ Cords And Extras (Powered On)
$300.00
DEFECTIVE Atari 810 Vintage Computer Disk Drive powers on Unit Only Boo G3D
$49.29
UNOCART-2600 SD card Multi Rom Cartridge for ATARI 2600 with CASE
$34.25
SDrive Max Floppy Drive Emulator Atari 8-Bit 400/800/XL/XE Firmware 1.5 USB C R2
$70.00
Atari XE 130XE Computer NTSC with Power Supply Powers On Untested
$159.95
INFO/soft Character Generator Manual for Atari 3000/5000/7000 NTSC
$40.00
ATARI Mouse with Adapter for ST, STE, Mega STE, TT Optical - USA Seller
$29.99
Atari 800 8-bit Computer System Fully Tested Great Condition 48k READ
$350.00
ATARI HDD Drive ACSI Emulator 520-1040ST/STF/STFM, STE, Mega STE, TT030 acsi2stm
$48.95