One additional point: I saw a user with a similar problem that was fixed by using Knoppix ver. 5.3.1. The latest I can find on any mirror is 5.3. Knopper.net lists 5.3 but I can't find it.
Kirk
I saw a thread similar to this, but have additional questions...I am new to this forum. Some background: The first time I ran Knoppix Live CD everything worked like a charm, and I was able to recover some data from a non-booting WinXP system. I needed to step away from the system and so I shut everything down. When I returned, it boots into the Knoppix desktop just fine, but does not show either of the hard drives on the desktop.
When it goes through the Knoppix boot process, it finds the drives just fine, lists them by name and so on. It lists the drives as hdc and hdd (in the command line-like boot process), and also lists the two DVD drives on the system (hda and hdb). But I can't see them on the DESKTOP. I can see a USB external drive on the desktop and the Knoppix CD. I did not change anything - permissions, ownership, nothing - when I booted either time.
Can anyone suggest possible solutions? In reading other posts, users mentioned including a log to help troubleshoot. If that would help, please give me specific instructions on how to find the log.
Many thanks,
Kirk-out
One additional point: I saw a user with a similar problem that was fixed by using Knoppix ver. 5.3.1. The latest I can find on any mirror is 5.3. Knopper.net lists 5.3 but I can't find it.
Kirk
I don't know the answer to your original problem. You didn't try to write to that hard drive, did you? As long as you didn't there is no good reason that I know that you would no longer get the partitions. i would try again after a complete power down. I also wonder why the hard drive is on the secondary IDE controller and the optical drive is on the primary, this is backwards from the normal way systems are usually set up. I don't have a good reason why you should change your configuration but then again I don't know why it's not working, so you might want to join the rest of us who put the hard drives on the primary IDE controller and see if that makes a difference.
As to 5.3 and 5.3.1 , 5.3 was never officially released on the Internet, only 5.3.1. I never use the mirrors any longer, and I can't say what you'll find there. But I very strongly advise that if you download 5.3.1 that you get it with BitTorrent, not from a mirror. I've seen way too many bad mirror downloads with Knoppix (nothing else gives me a problem, but Knoppix mirrors mess up about 50% of the time). BitTorrent is highly reliable and much faster than the mirrors when properly configured. See the Get Knoppix link near the top of this page for details. But one more thing, you mentioned that you have the 5.1.x CD. There is no official CD version of 5.3.x released, just a DVD version. So if you can't use a DVD version, stick with 5.1.1.

Dell EMC PowerEdge R740 8 Bay Server w/ 32GB RAM 2x GOLD 6132 2x 1600W PSU H730p
$499.88
Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$378.93
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb
$374.99
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD
$149.99
Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W
$409.99
Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO
$488.00
Dell Poweredge R810 4x Xeon X7560 2.26ghz 32-Cores | 256GB | 3x Trays | H700
$289.99
Dell Poweredge R620 10x 2.5" bay with 256GB (16x16gb) DDR3, 2x E5-2690v2, H710
$349.99
Dell EMC VxRail E560F 10-SFF 2*Gold 6230R 2.1GHz No RAM HBA330 iDrac Ent Server
$349.99