Can't locate kernel image knoppix and boot params...grrrrr

[xxchargerxx]

Hi,

Knoppix newbie, Linux veteran (slack).

I have a laptop with no HDD in it and am using Knoppix 5.1.1 CD to boot and do stuff. I two usb memory sticks (1GB and 4GB).

When I create a persistent Knoppix disk image everything goes fine (/dev/sda 4GB usb). The info at the end of the image creation says to pass the boot param home=/dev/sda or home=scan a la:

boot: knoppix home=/dev/sda

So..I reboot and get to the boot prompt and do:

boot: knoppix home=/dev/sda

but I get the error:

could not find kernel image: knoppix
??? what's the problem?

So I'm thinking maybe the kernel is called something more common so I do:

boot: linux home=/dev/sda

Kernel image is found and boots into Knoppix normally, but the boot param has no effect.../dev/sda/knoppix.img is not mounted as home.

So, the next time I reboot with NO boot params, at some time during the boot phase, Knoppix tells me it has found a saved image on /dev/sda and would I like it mounted as home....yes I would thank you. Knoppix finishes booting and indeed /dev/sda/knoppix.img is mounted as home. Next time I boot no such luck...and it hasn't found the knoppix.img since....

Any help??? I'm pretty sick of reconfigging things every time I boot...

My USB sticks are not flaky in any way and exhibit no ill behavior.

C

[chip.ling]

Give the following cheat code a try:

boot: knoppix home=/dev/sda1/knoppix.img

Rgds,
Chip

[xxchargerxx]

Thanks Chip,

But I guess there are 2 issues here:

1) There is no such kernel image "knoppix"

When I do:
boot: knoppix anything else here

I get:
cannot find kernel image knoppix

That is issue one.

2) The only valid kernel image name is linux. So I can try giving the full path to the persistent disk image as:

boot: linux home=/dev/sda/knoppix.img

But alas...no joy.

I guess my first objective here is to figure out why there is no kernel image named knoppix on the CD...Is this a documentation error?

Any Help?

Thanks

C

[kuono]

Thanks Chip,

But I guess there are 2 issues here:

1) There is no such kernel image "knoppix"

When I do:
boot: knoppix anything else here

I get:
cannot find kernel image knoppix

That is issue one.

2) The only valid kernel image name is linux. So I can try giving the full path to the persistent disk image as:

boot: linux home=/dev/sda/knoppix.img

But alas...no joy.

I guess my first objective here is to figure out why there is no kernel image named knoppix on the CD...Is this a documentation error?

Any Help?

Thanks

C

Have you tried to re-burn the disc? There was a couple of times where I recorded a cd somewhere (it was a Worms W0rld p4rty btw) and after I managed to read it once, it never was readable again.

I'm just saying... you can try
regards

[hal8000]

The correct boot parameter is

knoppix home=scan

the command will be parsed and should find your persistant image.

Other cheat codes here:
http://www.knoppix.net/wiki/Cheat_Codes