-
Ok so I finally got that figured out and disconnected the power and the ribbon to the hard drive.
I now get a message on the screen that says "Reboot and Select proper Boot device or Insert Boot Media in selected Boot device." No matter what I try I can't get past this message. I figured out how to use f2 to get into the Bios and set my dvd drive as the boot drive which is where the CD with Knoppix is, but still no luck.
I am curious, even if I could get the thing to boot, how could I recover my data if the hard drive is disconnected?
Any more suggestions will be deeply appreciated.
Thanks
-
Administrator
Site Admin-

Originally Posted by
MaxHeadRoom
I am curious, even if I could get the thing to boot, how could I recover my data if the hard drive is disconnected?
You couldn't, but the disconnection of the drive was more of a test to see if the drive was keeping you from booting than an effort to recover. It may well be, from what we are seeing here, that the drive has a hardware failure and you are not likely to recover anything from it. However, it is pretty suspicious that you still can't get a CD or DVD to boot, so I would hold off on calling that hard drive "dead" just yet.
I'm at a loss to tell you what to try next. Perhaps one of the others will have an idea.
---
Verifying of md5 checksum and burning a CD at slow speed are important.
-
Senior Member
registered user
Mount the drive in an external cabinet

Originally Posted by
Harry Kuhman

Originally Posted by
MaxHeadRoom
I am curious, even if I could get the thing to boot, how could I recover my data if the hard drive is disconnected?
You couldn't, but the disconnection of the drive was more of a test to see if the drive was keeping you from booting than an effort to recover. It may well be, from what we are seeing here, that the drive has a hardware failure and you are not likely to recover anything from it. However, it is pretty suspicious that you still can't get a CD or DVD to boot, so I would hold off on calling that hard drive "dead" just yet.
I'm at a loss to tell you what to try next. Perhaps one of the others will have an idea.
To recover data from a drive in a problematic PC, the safest is to take it out and mount it in an external USB cabinet. You get them for all actual drive types/sizes.
From the problem description, it would seem most likely that the BIOS is malfunctioning. Seldom worthwhile fixing on older PCs, in my opinion.
-
Senior Member
registered user
You could try resetting the bios by removing the coin size battery on the motherboard for a few moments. Unplug the computer first.
Since neither the CD or the hard drive will boot, I wouldn't necessarily give up on either of them. The fault may well be in the motherboard, so recovery of data from the drive using an external enclosure might be possible.
HTH
-
Thanks everybody. I have lots to try now. I'll let you know how it all plays out.
Thanks again so very much for all your help, ideas and suggestions.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Gigabyte 4U AI Server 10x Nvidia GPU 2x Xeon Gold 6150 36 Core 2.7GHz DDR4 RAM
$1625.00

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00

RDS CAL - Remote Desktop Services Windows Server 2019 50 User/Device Connections
$63.00

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD
$169.99

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W
$409.99

Dell EMC PowerEdge R740 8 Bay Server w/ 32GB RAM 2x GOLD 6132 2x 1600W PSU H730p
$499.88

Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO
$308.00

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$378.93

Dell Intel X710-DA2 5N7Y5 Dual-Port 10GbE SFP+ PCIe 3.0 x8 Network Adapter
$27.50

Dell PowerEdge R420 Server 2x Xeon E5-2440 v2 1.90GHz, 16GB , 8 Caddies NO HHD
$199.99