Hi

I spent days trying to enable my Agfa 1236S scanner on my Tekram 315 board.

I fact, I guess tha the Scsi board is not active, and I dont know how to enable it.

I found drivers on Tekram website, but only for 395

I an using Linux Knoppix 3.2 (based on Debian Woody) www.knoppix.org

I tryed Kurt's script :
--
root@athlon:/home/knoppix/Drivers/Scsi# sh rescan-scsi-bus.sh
Host adapter 0 (ide-scsi) found.
Scanning for device 0 0 0 0 ...
OLD: Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: YAMAHA Model: CRW-F1E Rev: 1.0d
Type: CD-ROM ANSI SCSI revision: 02
Scanning for device 0 0 1 0 ...
OLD: Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: PIONEER Model: DVD-ROM DVD-117 Rev: 1.07
Type: CD-ROM ANSI SCSI revision: 02
0 new device(s) found.
0 device(s) removed.
--
But both my CD-RW and DVD-Rom are IDE, not Scsi.

And I can see nothing in /dev/scsi

I am a bit new in Linux, and I begin to lose hope...

Could you help ?


Thanks,
TOM.

PS : I'd also like to work my Pinnacle 1394 Firewire borad for a camcorder, but this is another story...