I remastered my KNOPPIX 6.2.1 CD When I boot with the new CD it says "The graphical Subsystem could not be stated or terminated unexpectedly. was there something I need to do before I created the ISO image??
I am using the documentation at http://knoppix.net/wiki/Knoppix_Reamstering_Howto In this documentation it says that for >= Knoppix 6.0 I should use SHA1 instead of MD5 I also tried lowering my burn spped to 8x and am still getting the same result.
Was there ever an answer posrted for this???? I have the same exact issue.
Same problem here. Did anybody find a solution to this??
Details:
my remastered cd boots to the prompt and then displays the following message:
The graphical subsystem could not be started
or terminated unexpectedly.
Maybe your graphics adapter or monitor are not auto-configurable.
Please try to reboot and give some of the Knoppix-Cheatcodes
at the initial boot:-prompt, which match your graphics adapter.
Examples:
knoppix xmodule=radeon (or ati, nv, cirrus, ...)
knoppix xmodule=fbdev
knoppix xmodule=vesa
knoppix hsync=90 vsync=75
I can execute commands, navigate the filesystem, and ping URL's but the gui won't load and the above message keeps appearing about every minute or so.
the only changes I made in my remaster were to uninstall openoffice and change the background.jpg image.
Take a look at this thread (also in the remastering forum) and see if that information points you in a good direction. Looks like the same type of problem, possibly. The manner in which the new master image is created is a bit tricky.
Cheers!
Krishna![]()
The exact sme thing is happening to me. I have meticulously followed the directions. I get:
Details:
my remastered cd boots to the prompt and then displays the following message:
The graphical subsystem could not be started
or terminated unexpectedly.
Maybe your graphics adapter or monitor are not auto-configurable.
Please try to reboot and give some of the Knoppix-Cheatcodes
at the initial boot:-prompt, which match your graphics adapter.
Examples:
knoppix xmodule=radeon (or ati, nv, cirrus, ...)
knoppix xmodule=fbdev
knoppix xmodule=vesa
knoppix hsync=90 vsync=75
and if i startx manually it tells me something about "suspicious ownership root:root"
Any help..please?
this happened when I followed "re-master your flash installation" because I used a ntfs partition to copy my files to.
when I used another ext2 partition to copy the files to everything worked.
oh and do ctrl+alt+f6/f5 and you should be able to see more info?

Juniper MX204 +JUNOS and Dual Power Supply
$7299.99
Juniper EX2300 12-Port Gigabit PoE+ Managed Network Switch P/N: EX2300-C-12P
$149.99
🔀 Juniper Networks EX2300-C-12P 12× Gigabit PoE+ • 2× 10G SFP+ Compact Switch ⚡
$109.99
Juniper EX3400-24P 24-Port PoE+ GbE + 4-Port 1/10Gb SFP Switch
$245.00
Juniper Networks MX204-HW-BASE *BRAND NEW FACTORY SEALED* READ DETAILS
$8199.99
Juniper QFX5120-32C-AFI 32x100GbE Switch Dual AC Airflow In, Rail Kit Included
$8995.00
Juniper QFX5120-48Y-AFO 48 x 1/10/25GB SFP28 + 8 x 40/100GB Switch w/Dual AC
$10499.99
Juniper EX2300-C 12 Port Compact Gigabit Switch EX2300-C-12p Discounted Cosmetic
$79.86
Juniper QFX5100-48S-3AFI 48-Port SFP+ 6 QSFP+ 2x SFP/RJ-45 Management
$249.97
Juniper Networks Mist Wireless Access Points, Model AP45
$59.99