try "pppconfig" and then "pon provider-name" .to disconnect poff
I am having problems starting ppp in my debian installed with knx-hdinstall. I can dial in to my server and succesfully login but ppp does not appear to start. I cannot ping or get to any websites. Are there any modules or any pppd config files that I need to set up?
Thanks.
try "pppconfig" and then "pon provider-name" .to disconnect poff
I had the exact problem and not sure exactly how I fixed it. fist if your modem was ttyS4, use ./MAKEDEV ttyS4 to make it, then ln -s ttyS4 modem so kppp can see it. Try chmod 777 to both ttyS4 and modem. try route -n, while your are online you should get 2 lines and they both should end in ppp. try ifconfig eth0 down. try netcardconfig too. If you find out what did it post back. check /etc/resolv.conf to see numbers are good also resolv.conf in /etc/ppp. read man resolv.conf. Try to access google without name 216.239.37.101
Somewhere in there is solution. Don't give up.

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$378.93
Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb
$374.99
Dell PowerEdge R240 Intel Xeon E-2224 3.50GHz 8GB DDR4 ECC NO HDD 250W
$285.97
Dell Poweredge R810 4x Xeon X7560 2.26ghz 32-Cores | 256GB | 3x Trays | H700
$289.99
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD
$149.99
Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W
$409.99
Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2690 v3 | 64gb Ram | 2x 1600W
$524.99
Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD
$99.99
Dell Intel X710-DA2 5N7Y5 Dual-Port 10GbE SFP+ PCIe 3.0 x8 Network Adapter
$27.50