Results 1 to 8 of 8

Thread: Ejecting disc during shutdown?

  1. #1
    Junior Member
    Join Date
    Jun 2010
    Posts
    2

    Ejecting disc during shutdown?

    This should really be in the intial FAQ but I couldn't find the info anywhere. My question is how do I get the disc out of the box without resorting to a paperclip?

    I got a copy of the Knoppix 6.2.1 DVD from OSDisc.com and everything works fine until shut down. I use the standard menu shutdown selection and it shuts down the computer but refuses to give up the disc at any time during the shutdown no matter how much you press the eject button. My only option appears to be a restart into the native OS (removing the disc in the reboot process) and then shutting down from there.

    I may be wrong, but in older versions didn't there use to be a step in the shutdown where it would stop, asking you to remove the disc, and you would hit return to continue the shutdown?

  2. #2
    Moderator Moderator
    Join Date
    Jan 2010
    Location
    Asheville, NC, USA
    Posts
    528
    Quote Originally Posted by puddleglum View Post
    This should really be in the intial FAQ but I couldn't find the info anywhere. My question is how do I get the disc out of the box without resorting to a paperclip?

    I got a copy of the Knoppix 6.2.1 DVD from OSDisc.com and everything works fine until shut down. I use the standard menu shutdown selection and it shuts down the computer but refuses to give up the disc at any time during the shutdown no matter how much you press the eject button. My only option appears to be a restart into the native OS (removing the disc in the reboot process) and then shutting down from there.

    I may be wrong, but in older versions didn't there use to be a step in the shutdown where it would stop, asking you to remove the disc, and you would hit return to continue the shutdown?
    You are describing the same behavior I get with Knoppix 6+ (5 and earlier did what you described), though there is a work-around. I do a full shutdown, then start the system again and hit the eject button while the system is still getting ready to boot. Then I turn it off again. Another option that may be useful is to change the BIOS boot order to not use the CD first, and then use the boot options hotkey to choose the CD drive when I want it to boot (using the CD drive to store my Knoppix boot disk.)

    Hope that helps!
    Krishna

  3. #3
    Senior Member registered user
    Join Date
    Dec 2009
    Posts
    423
    Quote Originally Posted by puddleglum View Post
    This should really be in the intial FAQ but I couldn't find the info anywhere. My question is how do I get the disc out of the box without resorting to a paperclip?
    Did you not get this message appearing on the screen when the system shuts down ?
    Code:
    Please remove CD, close cdrom drive and hit return [2 minutes.
    If you don't get that, chances is that you have a cheatcode which is stopping it from happening.

    If you get the message, but yet the cdrom is not ejected, then you are reporting an unintended feature, ie a bug.

    Cheers.
    Last edited by kl522; 06-21-2010 at 12:25 AM.

  4. #4
    Junior Member
    Join Date
    Jun 2010
    Posts
    2
    I'm not getting the prompt asking me to remove the disc. That is the problem. It looks like this was removed in version 6 -- at least from default settings on the DVD. Any idea why it was removed?

    The problem with work arounds is I'm using the disc to show off Linux to people on other machines. Leaving a disc in their machine doesn't impress them.

  5. #5
    Senior Member registered user
    Join Date
    Dec 2009
    Posts
    423
    Quote Originally Posted by puddleglum View Post
    I'm not getting the prompt asking me to remove the disc. That is the problem. It looks like this was removed in version 6 -- at least from default settings on the DVD. Any idea why it was removed?
    Looks like there are multiple different versions of CDROM/DVDs which do different things in the syslinux.cfg/isolinux.cfg, with different parameters and cheatcodes.

    The actual work of ejecting the cdrom is in /etc/init.d/knoppix-halt, so you should check that it's intact. Assuming that's intact, then you should check if your syslinux.cfg/isolinux.cfg contains things like 'noeject'/'noprompt' which will inhibit the eject of cdrom and its prompting.

    You will be surprised that if I tell you the copy of KNOPPIX 6.2 CDROM which I have does eject the cdrom which shutting down.

  6. #6
    Moderator Moderator
    Join Date
    Jan 2010
    Location
    Asheville, NC, USA
    Posts
    528
    Quote Originally Posted by kl522 View Post
    Looks like there are multiple different versions of CDROM/DVDs which do different things in the syslinux.cfg/isolinux.cfg, with different parameters and cheatcodes.

    The actual work of ejecting the cdrom is in /etc/init.d/knoppix-halt, so you should check that it's intact. Assuming that's intact, then you should check if your syslinux.cfg/isolinux.cfg contains things like 'noeject'/'noprompt' which will inhibit the eject of cdrom and its prompting.

    You will be surprised that if I tell you the copy of KNOPPIX 6.2 CDROM which I have does eject the cdrom which shutting down.
    Since demonstrating Knoppix-boot-from-CD is the goal, perhaps it's best to just shut down with the power switch! You can eject after switching the power back on, thus showing that the original OS is unaffected by Knoppix.

    Cheers!
    Krishna
    p.s. My Knoppix 6.2.0 does the eject function properly, too; probably good to run the self-test on the disk to make sure that what you show around is in good shape.
    Last edited by krishna.murphy; 06-21-2010 at 08:25 PM.

  7. #7
    Senior Member registered user
    Join Date
    Dec 2009
    Posts
    423
    Quote Originally Posted by krishna.murphy View Post
    p.s. My Knoppix 6.2.0 does the eject function properly, too; probably good to run the self-test on the disk to make sure that what you show around is in good shape.
    Wow you seem to have changed your stand .....So now I don't know if there are multiple CDROM/DVD versions or there is just one version which does different thing for different users.

    As for me, I am still interested to get to the bottom of it. I would really doubt if a disk could be only corrupted at that section of it, which otherwise everything is OK. I would insist that "prompting" and "ejecting" goes hand-in-hand. If you see no prompting, it will not eject. If you see prompting but no eject, then it's a software bug.

  8. #8
    Moderator Moderator
    Join Date
    Jan 2010
    Location
    Asheville, NC, USA
    Posts
    528
    Quote Originally Posted by kl522 View Post
    Wow you seem to have changed your stand .....So now I don't know if there are multiple CDROM/DVD versions or there is just one version which does different thing for different users.

    As for me, I am still interested to get to the bottom of it. I would really doubt if a disk could be only corrupted at that section of it, which otherwise everything is OK. I would insist that "prompting" and "ejecting" goes hand-in-hand. If you see no prompting, it will not eject. If you see prompting but no eject, then it's a software bug.
    Yes, I am singing in a different key now. I realized I was comparing my hard-drive-resident experience with your removable-optical-disk issue; I apologize for my well-intentioned, but erroneous, response in the beginning.

    I wouldn't necessarily classify this as a "bug" per se - it's more of a quirk with one particular drive and disk. Since we still don't know whether the disk is okay, I'd say that's the most likely cause - because it's a frequently reported problem (and yes, it could affect only one thing - that you've tried.) The feature works, in general, but there may be some particular drives that aren't quite properly handled; however, the most likely cause is a bad burn - see the instructions here on how to do it with near-certain success (reportedly) under Windows XP.

    Anyway, have fun!
    Krishna

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge R640 1U 8SFF Server Barebones 2x Gold 5120 64GB H330 2x 750w picture

Dell PowerEdge R640 1U 8SFF Server Barebones 2x Gold 5120 64GB H330 2x 750w

$538.88



Dell PowerEdge R740xd Dual Intel Silver 4116 @2.1GHz 32GB HBA330 24Bay Server picture

Dell PowerEdge R740xd Dual Intel Silver 4116 @2.1GHz 32GB HBA330 24Bay Server

$525.00



Dell EMC VxRail E560F 10-SFF 2*Gold 6230R 2.1GHz No RAM HBA330 iDrac Ent Server picture

Dell EMC VxRail E560F 10-SFF 2*Gold 6230R 2.1GHz No RAM HBA330 iDrac Ent Server

$349.99



Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb picture

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb

$374.99



Dell PowerEdge R730 8 Bay Server 64Gb 1x80Gb SSD 3x900Gb SAS 2x12c v4CPU Proxmox picture

Dell PowerEdge R730 8 Bay Server 64Gb 1x80Gb SSD 3x900Gb SAS 2x12c v4CPU Proxmox

$620.00



Dell EMC PowerEdge R740 8 Bay Server w/ 32GB RAM 2x GOLD 6132 2x 1600W PSU H730p picture

Dell EMC PowerEdge R740 8 Bay Server w/ 32GB RAM 2x GOLD 6132 2x 1600W PSU H730p

$499.88



Dell PowerEdge R640 1U 8SFF Server Barebones 2x Gold 6150 64GB 2x 750w picture

Dell PowerEdge R640 1U 8SFF Server Barebones 2x Gold 6150 64GB 2x 750w

$218.88



USED Dell EMC PowerEdge R740 BAREBONES Server NO RAM HDD or CPU,  2x 750w PSU 🚚 picture

USED Dell EMC PowerEdge R740 BAREBONES Server NO RAM HDD or CPU, 2x 750w PSU 🚚

$170.00



Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram  2x 550W PSU No HDD picture

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD

$275.00



DELL POWEREDGE R340 Server | Xeon E-2126G 64GB RAM PERC H330 (Onboard) picture

DELL POWEREDGE R340 Server | Xeon E-2126G 64GB RAM PERC H330 (Onboard)

$399.95