-
Senior Member
registered user
Media used for Knoppix-benchmarks and which is best
I am using Super Tallent Pico C series 4 GB USB stick for Knoppix. It is very small in size and has very good reed speed. Here is the output of sudo hdparm -Tt /dev/sdb on my system:
/dev/sdb:
Timing cached reads: 1360 MB in 2.00 seconds = 680.29 MB/sec
Timing buffered disk reads: 70 MB in 3.05 seconds = 22.94 MB/sec
Here is some info regarding cached reads and buffered disk reads:
Cached reads:
"Perform timings of cache reads for benchmark and comparison pur‐
poses. For meaningful results, this operation should be
repeated 2-3 times on an otherwise inactive system (no other
active processes) with at least a couple of megabytes of free
memory. ###This displays the speed of reading directly from the
Linux buffer cache without disk access. This measurement is
essentially an indication of the throughput of the processor,
cache, and memory of the system under test.###"
Buffered disk reads:
"Perform timings of device reads for benchmark and comparison
purposes. For meaningful results, this operation should be
repeated 2-3 times on an otherwise inactive system (no other
active processes) with at least a couple of megabytes of free
memory. This displays the speed of reading through the buffer
cache to the disk without any prior caching of data. ###This mea‐
surement is an indication of how fast the drive can sustain
sequential data reads under Linux, without any filesystem over‐
head.### To ensure accurate measurements, the buffer cache is
flushed during the processing of -t using the BLKFLSBUF ioctl."
-
Senior Member
registered user
I am using a poor man's install of Knoppix 6.2.1 on my hard disk. It is a WD1200BEVE built into my notebokk (hp omnibook xt1000).
Here is the output of sudo hdparm -Tt /dev/sda on my system:
/dev/sda:
Timing cached reads: 118 MB in 2.03 seconds = 58.13 MB/sec
Timing buffered disk reads: 88 MB in 3.01 seconds = 29.27 MB/sec
I am delivering these timings for comparative purposes. I do not use a USB stick for Knoppix on that system because it supports USB 1.1 only.
-
Senior Member
registered user

I am also using poor man's install on HD, here is mine :-
/dev/sda:
Timing cached reads: 2258 MB in 2.00 seconds = 1129.61 MB/sec
Timing buffered disk reads: 194 MB in 3.01 seconds = 64.37 MB/sec
I prefer not to suffer the agony of the slower devices.
-
Senior Member
registered user
For my SanDisk 2Gb SD Card,
The output of sudo hdparm -Tt /dev/sdb is as follows:
/dev/sdb:
Timing cached reads: 2146 MB in 2.00 seconds = 1073.60 MB/sec
Timing buffered disk reads: 30 MB in 3.20 seconds = 9.37 MB/sec
-
Senior Member
registered user
Meaning you have a very fast computer, but your flash is very slow. Consider moving the entire '/mnt-system' to your harddisk.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Seagate ST6000NM0115 6TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$159.99

Seagate Exos X14 10TB 7200RPM 3.5" SAS 12Gb/s Hard Drive HDD ST10000NM0528
$165.00

Seagate 14TB Exos X14 7200RPM SATA 6Gb/s 256MB 3.5" Enterprise HDD ST14000NM0408
$354.99

Seagate Exos X16 ST10000NM010G 10TB 7200RPM SAS 12Gb/s 3.5" 512e/4Kn HDD
$199.00

Seagate Enterprise Capacity 2TB 2.5in SATA Internal HDD ST2000NX0403
$60.00

HGST HUS724040ALA640 4TB 7200 RPM SATA 3.5" Internal Desktop Drive 100% Health
$78.00

ST6000NM0034 DELL 6TB 7.2K 12G SAS 512E 3.5" ENTERPRISE HARD DRIVE 8D1V4 08D1V4
$54.99

Dell ST91000640SS 1TB 2.5" 6Gb/s 64MB 7.2K RPM SAS Hard Drive Dell P/N: 0VXTPX
$16.99

New Western Digital WD40EFPX 68C6CN0 4TB 3.5" SATA III Internal NAS Red Plus HDD
$137.59

HGST HUH721010AL4200 10TB SAS 12Gb/s 4Kn 3.5 in Enterprise HDD | 0F27402
$199.99