I ran the script and here are the results:

Boot Info Script 0.55 dated February 15th, 2010

============================= Boot Info Summary: ==============================

=> Acer 3 is installed in the MBR of /dev/sda

sda1: __________________________________________________ _______________________

File system: vfat
Boot sector type: MSWIN4.1: Fat 32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 98
Boot files/dirs: /IO.SYS /MSDOS.SYS /COMMAND.COM

sda2: __________________________________________________ _______________________

File system: Extended Partition
Boot sector type: Grub
Boot sector info: Grub 0.97 is installed in the boot sector of sda2 and
looks at sector 104812036 of the same hard drive for
the stage2 file. A stage2 file is at this location on
/dev/sda. Stage2 looks on partition #6 for
/boot/grub/menu.lst.

sda5: __________________________________________________ _______________________

File system: swap
Boot sector type: -
Boot sector info:
sda6: __________________________________________________ _______________________

File system: ext4
Boot sector type: -
Boot sector info: Operating System: Welcome to openSUSE 11.3 "Teal"
- Kernel ().
Boot files/dirs: /boot/grub/menu.lst /etc/fstab

sda7: __________________________________________________ _______________________

File system: ext3
Boot sector type: -
Boot sector info: Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================

Drive: sda ___________________ __________________________________________________ ___

Disk /dev/sda: 100.3 GB, 100256292864 bytes
255 heads, 63 sectors/track, 12188 cylinders, total 195813072 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start End Size Id System

/dev/sda1 63 65,641,652 65,641,590 c W95 FAT32 (LBA)
/dev/sda2 * 65,641,653 195,800,219 130,158,567 f W95 Ext d (LBA)
/dev/sda5 65,641,716 66,782,204 1,140,489 82 Linux swap / Solaris
/dev/sda6 66,782,268 108,727,919 41,945,652 83 Linux
/dev/sda7 108,727,983 195,800,219 87,072,237 83 Linux


blkid -c /dev/null: __________________________________________________ __________

Device UUID TYPE LABEL

/dev/sda1 3D68-1E0F vfat
/dev/sda2: PTTYPE="dos"
/dev/sda5 94df2aa6-9c9a-4820-8f96-cf31d31ad1bc swap
/dev/sda6 8e73b184-1e6f-4693-8a5e-938cd6aaec05 ext4
/dev/sda7 32cf9172-d8cf-4e3e-ae95-c401cfcd1a63 ext3
/dev/sda: PTTYPE="dos"

============================ "mount | grep ^/dev output: ===========================

Device Mount_Point Type Options

/dev/sda6 / ext4 (rw,acl,user_xattr)
/dev/sda7 /home ext3 (rw)
/dev/sda1 /windows/C vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,utf8=tr ue)


=========================== sda6/boot/grub/menu.lst: ===========================

# Modified by YaST2. Last modification on Sun Oct 3 07:17:56 EDT 2010
# THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader
# Configure custom boot parameters for updated kernels in /etc/sysconfig/bootloader

default 1
timeout 8
##YaST - generic_mbr
gfxmenu (hd0,5)/boot/message
##YaST - activate

###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 11.3 - 2.6.34.7-0.3 (default)
root (hd0,5)
kernel /boot/vmlinuz-2.6.34.7-0.3-default root=/dev/disk/by-id/ata-Maxtor_6B100P0_B3D199GH-part6 resume=/dev/disk/by-id/ata-Maxtor_6B100P0_B3D199GH-part5 splash=silent quiet showopts vga=0x317
initrd /boot/initrd-2.6.34.7-0.3-default

###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 11.3 - 2.6.34.7-0.3 (default)
root (hd0,5)
kernel /boot/vmlinuz-2.6.34.7-0.3-default root=/dev/disk/by-id/ata-Maxtor_6B100P0_B3D199GH-part6 showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe vga=0x317
initrd /boot/initrd-2.6.34.7-0.3-default

###Don't change this comment - YaST2 identifier: Original name: linux###
title Desktop -- openSUSE 11.3 - 2.6.34.7-0.3
root (hd0,5)
kernel /boot/vmlinuz-2.6.34.7-0.3-desktop root=/dev/disk/by-id/ata-Maxtor_6B100P0_B3D199GH-part6 resume=/dev/disk/by-id/ata-Maxtor_6B100P0_B3D199GH-part5 splash=silent quiet showopts vga=0x317
initrd /boot/initrd-2.6.34.7-0.3-desktop

###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 11.3 - 2.6.34.7-0.3 (desktop)
root (hd0,5)
kernel /boot/vmlinuz-2.6.34.7-0.3-desktop root=/dev/disk/by-id/ata-Maxtor_6B100P0_B3D199GH-part6 showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe vga=0x317
initrd /boot/initrd-2.6.34.7-0.3-desktop

###Don't change this comment - YaST2 identifier: Original name: windows###
title Windows
rootnoverify (hd0,0)
chainloader +1

###Don't change this comment - YaST2 identifier: Original name: floppy###
title Floppy
rootnoverify (fd0)
chainloader +1

###Don't change this comment - YaST2 identifier: Original name: puppy###
title Puppy Linux 5.0.1
rootnoverify (hd0,0)
kernel /puppy501/vmlinuz pmedia=atahd psubdir=puppy501
initrd /puppy501/initrd.gz

###Don't change this comment - YaST2 identifier: Original name: puppy###
title Game Optimized Puppy Linux
rootnoverify (hd0,0)
kernel /gamepuppy/vmlinuz pmedia=atahd psubdir=gamepuppy append root=/dev/ram0 initrd=image.gz acpi=off PFILE=ask
initrd /gamepuppy/image.gz

title Knoppix 6.2 dvd
root (hd0,0)
kernel (hd0,0)/knoppix/boot/isolinux/linux fromhd=/dev/sda1 knoppix_dir=knoppix/KNOPPIX ramdisk_size=100000 lang=us vt.default_utf8=0 apm=power-off vga=791 nomce quiet loglevel=0
initrd (hd0,0)/knoppix/boot/isolinux/minirt.gz
savedefault
boot
=============================== sda6/etc/fstab: ===============================

/dev/disk/by-id/ata-Maxtor_6B100P0_B3D199GH-part5 swap swap defaults 0 0
/dev/disk/by-id/ata-Maxtor_6B100P0_B3D199GH-part6 / ext4 acl,user_xattr 1 1
/dev/disk/by-id/ata-Maxtor_6B100P0_B3D199GH-part7 /home ext3 defaults 1 2
/dev/disk/by-id/ata-Maxtor_6B100P0_B3D199GH-part1 /windows/C vfat users,gid=users,umask=0002,utf8=true 0 0
proc /proc proc defaults 0 0
sysfs /sys sysfs noauto 0 0
debugfs /sys/kernel/debug debugfs noauto 0 0
usbfs /proc/bus/usb usbfs noauto 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0

=================== sda6: Location of files loaded by Grub: ===================


51.6GB: boot/grub/menu.lst
53.6GB: boot/grub/stage2
53.7GB: boot/initrd
53.7GB: boot/initrd-2.6.34.7-0.3-default
53.7GB: boot/initrd-2.6.34.7-0.3-desktop
53.6GB: boot/vmlinuz
53.6GB: boot/vmlinuz-2.6.34.7-0.3-default
53.6GB: boot/vmlinuz-2.6.34.7-0.3-desktop
=============================== StdErr Messages: ===============================

No volume groups found
mdadm: No arrays found in config file or automatically