Results 1 to 3 of 3

Thread: 6.4.3 not as good as 5.3.1

  1. #1
    Member registered user
    Join Date
    Dec 2006
    Posts
    50

    6.4.3 not as good as 5.3.1

    Oh dear, after the disappointments of 6.2.*, this latest version was so long anticipated. But at just 80% of the size of 5.3.1 things were not looking promising. Lots of shortcomings, but mainly, the lack of libreadline kills this version for me. I haven't even tried the other two main required advances: good pickup of wireless card, and smooth transition from laptop screen to external monitor even when in console mode i.e. init 2. And that ghastly startup/ shutdown voice now makes herself evident even when shutting down from init 2, which is new and very annoying when what one wants is to be sparse and discreet.
    Oh boo hoo. So 5.3.1 still rules (but definitely shows its age in some contexts).
    I know one shouldn't be critical of free software and, above all, personal effort offered gratis. Thanks so much Klaus for this and all past provision. But who complained that 5.3.1 was too big?
    By the way I can't make sense of new output provided by latest version of "fdisk -l" which now identifies weird problems with starting points of some not all partitions: i.e. all those starting with 63 sectors describing geography. Surely this is a local partition-specific architectural requirement, not a fault, and therefore should not be identified as such?
    Fergus

  2. #2
    Member registered user
    Join Date
    Feb 2008
    Posts
    31
    And still no gfortran. If the intent is to use apt-get, that assumes an internet connection, enough memory, and a bit of time. It was so nice in 5.3.1 to have everything one needs, installed and configured on a single .iso, ready for use anywhere.

    It is convenient to have a file small enough to store in a FAT filesystem (4 Gb), but that is not worth sacrificing important tools.
    Last edited by carolus; 12-31-2010 at 10:17 PM. Reason: error in units

  3. #3
    Junior Member registered user
    Join Date
    Oct 2008
    Posts
    13
    You can change the startup and shutdown sounds by replacing the files

    /usr/share/sounds/startup.ogg
    and
    /usr/share/sounds/shutdown.ogg

    with your own chosen files, and have it stored to a persistent medium.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Lot of 500 Cisco 10-3145-02 QSFP-100G-CWDM4-S 100G CWDM4 QSFP28 Transceiver picture

Lot of 500 Cisco 10-3145-02 QSFP-100G-CWDM4-S 100G CWDM4 QSFP28 Transceiver

$1500.00



Cisco WS-C3650-12X48UR-L 48-Port Stackable Layer 3 8x10G SFP+ Port Switch picture

Cisco WS-C3650-12X48UR-L 48-Port Stackable Layer 3 8x10G SFP+ Port Switch

$129.99



Cisco WS-C3850-12X48U-S 48-Port UPoE Switch 1100W PSU picture

Cisco WS-C3850-12X48U-S 48-Port UPoE Switch 1100W PSU

$149.99



Cisco C9300NM8X Network Switch Module picture

Cisco C9300NM8X Network Switch Module

$599.99



Cisco C9300X-12Y 12 ports 25G/10G/1G SFP28 715W AC C9300X-12Y-E picture

Cisco C9300X-12Y 12 ports 25G/10G/1G SFP28 715W AC C9300X-12Y-E

$8000.00



Cisco C9300-48UXM-A Switch 9300 Series 48-port UPoE Network picture

Cisco C9300-48UXM-A Switch 9300 Series 48-port UPoE Network

$874.99



Cisco Catalyst C9120AXI-B Wi-Fi 6 Access Points picture

Cisco Catalyst C9120AXI-B Wi-Fi 6 Access Points

$36.00



Cisco C9300L-STACK-KIT V02 Stack picture

Cisco C9300L-STACK-KIT V02 Stack

$170.00



Cisco WS-C3850-24XU-L Switch Stackable 24 100Mbps/1/2.5/5/10 Gbps UPOE picture

Cisco WS-C3850-24XU-L Switch Stackable 24 100Mbps/1/2.5/5/10 Gbps UPOE

$225.00



Cisco XFP-10G-MM-SR 10G XFP Transceiver picture

Cisco XFP-10G-MM-SR 10G XFP Transceiver

$79.89