Viewing motherboard temperatures

[pummer]

Does anyone know an easy way to see your temps in Knoppix?

If so, please post

I think my system might be getting devilishly hot and the BIOS has no temp readings (yeah it's old)

[rickenbacherus]

This might do

[oscar]

...there is not an easy way...in Knoppix CD it is impossible.
lm_sensors must be installed and kernel must be patched and then recompiled
ksensor is only a gui front-end for lm_sensors.

[Dave_Bechtel]

--I dunno about Knoppix, but I'm using CPUCool in Win98.

http://www.podien.onlinehome.de/default.htm

Does anyone know an easy way to see your temps in Knoppix?

If so, please post

I think my system might be getting devilishly hot and the BIOS has no temp readings (yeah it's old)

[TheCyberDude]

How to get KSensors to Work

First do the following at link below.
http://www.knoppix.net/forum/viewtopic.php?t=4639

Second do the following code:

apt-get -t unstable install ksensors
apt-get install hddtemp
apt-get install i2c-source lm-sensors lm-sensors-source

Third - go to /usr/src and move lm-sensors.tar.gz to /home/knoppix/tmp

DON'T EXTRACT lm-sensors.tar.gz IN /usr/src !!!

Also don't use lm-sensors from there Web Site, it is missing some i2c modules - use apt-get install lm-sensors-source !

Fourth - Copy lm-sensors to /usr/local and Compile: make all | su to root and make install

Fifth - Run sensors-detect [root] - Follow direction's, don't worry if it can't load some modules (Say no to i2c-riva, NEVER load it - it will Screw up your Kernel) at the end it will give directions to get modules to load after rebooting.

Sixth - Configure KSensors to show temps, voltages, etc. IF they don't show, try
insmod i2c-dev or modprobe i2c-dev - OR/AND rerun sensors-detect and at:
If you have the choice, do you want to use the ISA bus or the
I2C/SMBus (ISA/smbus)?

Select ISA (NOTE: If you have no ISA slots like my motherboard - There STILL is an ISA BUS
on you Motherboard !!!)

Mine is running OK ...

[TheCyberDude]

UPDATE

Also install the following:

apt-get install libsensors-dev

Also ksensors_alert.wav was not included in install, download the following.
http://www.internettrash.com/users/t...dude/alert.wav

Concerning HDD Temp, cd /usr/sbin and hddtemp /dev/<your hdd>

SUID bit of hddtemp file must by set, type:
chmod +s hddtemp

WARNING: Setting suid bit can be a security flaw.

/usr/sbin# hddtemp /dev/hdg
WARNING: Drive /dev/hdg doesn't appear in the database of supported drives
WARNING: But using a common value, it reports something.
WARNING: Note that the temperature shown could be wrong.
WARNING: See --help, --debug and --drivebase options.
WARNING: And don't forget you can add your drive to hddtemp.db
/dev/hdg: Maxtor 4D040H2: 0 C or F


Uncomment Maxtor 4D040H2 in /etc/hddtemp.db and you get the following.

/usr/sbin# hddtemp /dev/hdg
/dev/hdg: Maxtor 4D040H2: known drive, but it doesn't have a temperature sensor.

[arkaine23]

Yes, but how do you remaster it so it can work on the Live CD? Someone give me a patched kernel that can be run on the CD!

I relaize the users would still need to configure lm-sensors each time they boot....

[audioaficionado]

Why can't the im-sensor configs be saved with all the Knoppix configs when you save your Knoppix configs?

[arkaine23]

It's not really that. It's that the kernel has certain limitations when you're booting from CD, and it needs the i2c support. I don;t know how to go about installing i2c in the kernel without fubarring its ability to be booted from the CD.

I'd have to make a script that saved your lm-sensors configuration while running off the CD- they are kept in /etc not in /home/knopppix, so persistent home won't work.

But following this procedure after a hdd-install should work just fine.

[audioaficionado]

I don't use pesistant home but I use the saved configs after each session and it picks up where I left off when I use the 'knoppix myconfig=scan' cheat code.