Results 1 to 7 of 7

Thread: DHCP

  1. #1
    Senior Member
    Join Date
    Jul 2011
    Posts
    110

    DHCP

    Im booting Knoppix 6.7 via pxe. Once Knoppix starts to load I get delay in DHCP during boot. The sending dhcp message appears for quiet some time. Then knoppix goes about its boot. The unit has an ip from the pxe process. So my question is, is this a knoppix delay or my pxe server? Any ideas?
    Thanks!

  2. #2
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    FWIW, no significant delay in normal (not pxe) use of dhcp.

  3. #3
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    So called normal use of DHCP within Knoppix doesnt begin until after X has started/loaded. Knoppix needs IP before X when pxe booting. I think it may be within minirt.gz the ini file itself. ?

  4. #4
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    I've contributed all I know for sure on this.
    But if pxe needs IP early, why isn't the server providing it already?

    Are you able to decode minirt.gz and read the init?

  5. #5
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    Yes, Ive just started to dig thru ini. I think DHCP server is confused by knoppix asking for an ip from the same mac addy that just requested ip?

  6. #6
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    FWIW,

    In 6.4.4 my LiveUSB took almost 120 seconds to get on-line initially.
    I finally disabled Network Manager and got down to about 55-or so seconds
    using a primitive /etc/rc.local routine to get my wifi going.

    In 6.7, there was no similar slow start to getting on-line in less than
    a minute and no need to circumvent Network Manager.

    Obviously either Knoppix or Network Manager must have changed between
    6.4.4 and 6.7. If you don't find the answer in minirt.gz, then you might
    see if there's some difference in NM that explains your situation.

  7. #7
    Senior Member
    Join Date
    Jul 2011
    Posts
    110
    Thanks for those ideas. I will post my findings. May take me a few days.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


One Of A Kind Homemade Vintage Mainframe Computer, Logic Module Wood Bookends picture

One Of A Kind Homemade Vintage Mainframe Computer, Logic Module Wood Bookends

$149.00



Vintage Telex 952003-112 Mechanical Terminal Keyboard IBM 3270 Mainframe DB25 picture

Vintage Telex 952003-112 Mechanical Terminal Keyboard IBM 3270 Mainframe DB25

$594.99



Vintage Intel Mainframe Server MCM CPU Substrate Lot Prototyping PGA Validation picture

Vintage Intel Mainframe Server MCM CPU Substrate Lot Prototyping PGA Validation

$500.00



HP 5060-8359 8K Semiconductor Memory Module 5080-9747 Vintage HP Computer picture

HP 5060-8359 8K Semiconductor Memory Module 5080-9747 Vintage HP Computer

$157.30



Vintage Japanese Katakana Double Shot Sperry Univac UTS 4000 Keyboard 1981 picture

Vintage Japanese Katakana Double Shot Sperry Univac UTS 4000 Keyboard 1981

$199.99



LOT of 14 DATA 100 Corporation Mainframe Terminal Boards Memory Backplane Gold picture

LOT of 14 DATA 100 Corporation Mainframe Terminal Boards Memory Backplane Gold

$749.99



Vintage Mainframe Computer Disk Drive Pack Dyson SMD 5 Level Disks picture

Vintage Mainframe Computer Disk Drive Pack Dyson SMD 5 Level Disks

$69.00



3x Various Brands 10.5

3x Various Brands 10.5", 8.5" & 7" Mainframe 9-Track Reel Computer Data Tape .5"

$34.99



HP 13210-60001 Disc Drive Interface PCB HP 7900A 7901A Vintage picture

HP 13210-60001 Disc Drive Interface PCB HP 7900A 7901A Vintage

$157.93



VINTAGE Artecon LX-1558FN HDD EOD SubSystem Mainframe POWERS ON RARE picture

VINTAGE Artecon LX-1558FN HDD EOD SubSystem Mainframe POWERS ON RARE

$299.99