Results 1 to 2 of 2

Thread: 7.2 Flash Boot mount failure

  1. #1

    7.2 Flash Boot mount failure

    Hi! So, besides rain for planting rice, I need to get Knoppix7.2 to boot from a flash drive. I downloaded the DVD, checked md5 and copied the iso image to a flash drive using an overlay option. Knoppix boots fine on my Toshiba laptop but hiccups on my PC, and, of course, I need it to work on my PC.

    I boot using KNOPPIX64 or DEBUG64
    Here's the boot error message I'm getting:
    Compressed KNOPPIX image is broken: /mnt-system/KNOPPIX/KNOPPIX on /dev/sdc1 on /mnt-system type vfat (rw,relatime,fmask=0000,dmask=0000,allowutime=0022 ,codepage=850,iocharset=utf8,shortname=winnt,error s=remount-ro)
    [ 15.639342] cloop: out of kernel mem for offsets
    Could not mount /mnt-system/KNOPPIX/KNOPPIX. Starting debugging Shell . . .
    sh: can't access tty: job control turned off

    Here are my computer spec's
    Motherboard: ASUS P8H61-M LE
    CPU: Intel Core i5 2450 @ 3.10 GHz
    On-Board Graphics: Intel HD 2500Graphics, 2 ports
    Grahics Card: Power Color Radeon HD6670, 2 ports *****
    Hard Drive for OS: 120GB Solid State SanDisk Extreme SSD SSDX120GG25
    Hard Drive for work files: Western Digital 120GB
    RAM: 8GB, 2 X 4GB Kingston DDR3 @ 1333 Mhz
    Power Supply: 530 Watt Modular, Raidmaxx RX530ss
    Optical Disk Drive: DVD/CD R-RW, LG MODISK SATA
    Monitors:
    Samsung 223BW 21.6" LCD / TFT active matrix
    Samsung Syncmaster 793MG 17in. Flat panel SVGA CRT Monitor
    LG E2342T 23" LCD/LED flat screen
    Dell M783S 17in. Flat panel SVGA CRT Monitor

    Radeon Display driver: 8.982.0.0000

    /# fdisk -l results:
    /dev/sda1 data storage drive 120 GB
    /dev/sdb1 SSD reserve partition for booting 100MB
    /dev/sdb2 ssd drive c: 120GB - 100MB
    /dev/sdc1 flash drive KNOPPIX shows as boot device 8GB FAT32

    Thanks for the help.
    Geoffrey Wheeler, Ban Thin, Tambon Ban That, Phen District, Udon Thani Thailand

  2. #2
    I updated the BIOS (to 4601 x64 9/8/2013), set it to Enable Multiple Monitors (I've got 4) and set Primary Graphics = PCIe (Radeon HD6670) and used the boot menu [F8]. There are 2 options for booting from the USB: UEFI and non-UEFI. UEFI errors, non-UEFI boots! I'm happy about that.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


SFP TO RJ45 TRANSCEIVER SFP MODULE COPPER SFP OPTICAL PORT TO RJ45 ETHERNET PORT picture

SFP TO RJ45 TRANSCEIVER SFP MODULE COPPER SFP OPTICAL PORT TO RJ45 ETHERNET PORT

$7.99



Dell Intel X710-DA2 5N7Y5 Dual-Port 10GbE SFP+ PCIe 3.0 x8 Network Adapter picture

Dell Intel X710-DA2 5N7Y5 Dual-Port 10GbE SFP+ PCIe 3.0 x8 Network Adapter

$27.50



Cisco Meraki MA-SFP-1GB-SX Network Tranceiver Module picture

Cisco Meraki MA-SFP-1GB-SX Network Tranceiver Module

$89.00



CISCO SFP-10G-SR V03 10-2415-03 NEW SEALED picture

CISCO SFP-10G-SR V03 10-2415-03 NEW SEALED

$39.99



Genuine Cisco SFP-10G-SR 0-2415-03 10 Gigabit Transceiver picture

Genuine Cisco SFP-10G-SR 0-2415-03 10 Gigabit Transceiver

$5.40



New Open Box Lot of (5) Genuine Cisco SFP-10G-SR-S 10Gig Transceivers 10-3105-01 picture

New Open Box Lot of (5) Genuine Cisco SFP-10G-SR-S 10Gig Transceivers 10-3105-01

$84.99



Arista SFP-10G-SR 10gbase-SR transceiver SFP+ (XVR-00001-02) picture

Arista SFP-10G-SR 10gbase-SR transceiver SFP+ (XVR-00001-02)

$9.00



HP 560SFP+ 10GB 2-port  PCIe NIC Ethernet ADAPTER 669279-001 w/ (2) 10GB SFP+ picture

HP 560SFP+ 10GB 2-port PCIe NIC Ethernet ADAPTER 669279-001 w/ (2) 10GB SFP+

$16.99



NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping* picture

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*

$24.00



HP 557SFP+ ETHERNET 10GB 2 PORT 792834-001 788991-001 HIGH    LOT OF 10 picture

HP 557SFP+ ETHERNET 10GB 2 PORT 792834-001 788991-001 HIGH LOT OF 10

$70.00