Installing Knoppix on Compact Flash

[skendric]

I'm installing Knoppix on an 8GB Compact Flash card, but I see 'No boot device available'. Tips on what I'm missing?

I used the following procedure to transfer Knoppix to the CF card:
[I produced this procedure by reading https://www.inductiveautomation.com/..._card_143.doc]

(1) Booted laptop from a Knoppix 6.7.0 CD
(2) Used Gparted to create a single ext2 partition
(3) cp -r /mnt-system/boot /media/sdb1
(4) cd /media/sdb1/boot
(5) mv isolinux extlinux
(6) mv isolinux.cfg extlinux.conf
(7) chmod +w extlinux.conf
( vi extlinux.conf
[ add the following to every APPEND line: nodma fromhd noprompt noeject ]
(9) cp -r /mnt-system/KNOPPIX /media/sdb1
(10) Download syslinux-3.86.zip, uncompress in /home/knoppix
(11) cd /home/knoppix/syslinux-3.86/mbr
(12) cat mbr.bin > /dev/sdb
(13) cd ../extlinux
(14) ./extlinux -i /media/sdb1/boot/extlinux
/media/sdb1/boot/extlinux is device /dev/sdb1

root@Microknoppix:/media/sdb1/boot/extlinux# ls
balder.img extlinux.conf f3 isolinux.bin logo.16 minirt.gz
boot.cat extlinux.sys german.kbd linux memdisk
boot.msg f2 grub.exe linux64 memtest

root@Microknoppix:/media/sdb# ls
. ..

I remove the CF card from the laptop, insert into the Alix board, power on, and see this text:
PC Engines ALIX.2 v0.99m
640 KB Base Memory
261120 KB Extended Memory

01F0 Master 848A CF CARD
Phys C/H/S 15490/16/63 Log C/H/S 971/255/63 LBA
Missing operating system.
No boot device available, press Enter to continue.

What does this message mean? Have I fumbled the MBR procedure?

--sk

Stuart Kendrick

[Werner P. Schulz]

Please use the instructions you'll find at Hard drive installation.

[skendric]

Thank you, that works.