Hi Klaus,
I just woul like to bring to your attention that the output format of the "ifconfig" program have now changed
which now breaks multiple scripts, knoppix-terminalserver being one of them. Knoppix 7.5.0 was still ok.
cf: https : / / bugzilla.redhat.com/show_bug.cgi?id=784314
I also have trouble getting the vmware tools to autostart and have the cut & paste working between
the host and the guest vm. It is probablly not related to the above problem. Any idea ?
Best Regards,
Gilles

(new) ifconfig as in Knoppix 7.6.0
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 metric 1
inet 172.17.17.17 netmask 255.255.255.0 broadcast 172.17.17.255
inet6 fe80::5054:ff:fe3f:c083 prefixlen 64 scopeid 0x20<link>
ether 52:54:00:3f:c0:83 txqueuelen 1000 (Ethernet)
RX packets 339806 bytes 317184647 (302.4 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 158189 bytes 14694182 (14.0 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

(old) ifconfig as in Knoppix 7.5.0
eth0 Link encap:Ethernet HWaddr 52:54:00:A3:98:1B
inet addr:172.17.17.15 Bcast:172.17.17.255 Mask:255.255.255.0
inet6 addr: fe80::5054:ff:fea3:981b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:678733 errors:0 dropped:0 overruns:0 frame:0
TX packets:176576 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:362735982 (345.9 MiB) TX bytes:15404448 (14.6 MiB)