Results 1 to 3 of 3

Thread: Make knoppix run with xmodule=nv

Hybrid View

  1. #1
    Junior Member
    Join Date
    Dec 2015
    Posts
    1

    Make knoppix run with xmodule=nv

    Hello guys,

    I need a little help from u.
    I have a problem running Knoppix on my old computer.
    Knoppix freeze after displaying the background image.
    I think the problem is from driver/module of the video card (nVidia FX5200) because when i boot knoppix using xmodule=nv command knoppix runs perfect.
    Other thing that i noticed.. when knoppix freezes the video driver for my video card is nouveau not nvidia.
    What can i do (what files do i have to modify) to make knoppix boot with xmodule=nv without me interfering?
    (i am not an expert on linux so please be more detailed)

    Thx.

  2. #2
    Hi:

    Assuming the bootloader of SYSLINUX is used to boot up KNOPPIX, the xmodule=nv cheatcode can be appended to its configuration file, syslinux.cfg. On a typical set-up of KNOPPIX, the file can be found in the /mnt-system/boot/syslinux folder. The exact place to append the cheatcode is documented under the Micro-Remastering section of KNOPPIX's wiki (http://knoppix.net/wiki3/index.php?t...ro-Remastering). In the case of GRUB Legacy or GRUB2 used as bootloader, the details can also be found on KNOPPIX's wiki (http://knoppix.net/wiki3/index.php?t...e_Installation).

    For curing the failure to enter runlevel 5, I am gonna keep my mouth shut coz that's too techie for my level... If others have found the time to be on board, they may ask to have a quick peek at the Xorg.log file when booting with the nouveau driver....

  3. #3
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Time to ask the obvious questions that I've asked so many times before. Did you burn the ISO file at a low speed? Did you check the md5 of the image that you downloaded? Have you run testdisk? Have you run memcheck? What version of Knoppix are you talking about and, if as expected it is the current version, had you been able to run older versions without problems?

    If xmodule=nv resolves your problem, why do you not just do that? Lots of people use "cheat codes" to help Knoppix boot.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Dell TXCMC ASR-8405 SAS/SATA 12Gb/s PCI Express x8 RAID Controller picture

Dell TXCMC ASR-8405 SAS/SATA 12Gb/s PCI Express x8 RAID Controller

$49.49



ASR-71605 Adaptec 16 Port SAS/SATA 6Gbps PCIe x8 3.0 Raid Controller 1GB LP picture

ASR-71605 Adaptec 16 Port SAS/SATA 6Gbps PCIe x8 3.0 Raid Controller 1GB LP

$129.99



Adaptec ASR 71605 1GB 16Port HBA RAID PCIe Controller Card w/ Battery 4x Cables picture

Adaptec ASR 71605 1GB 16Port HBA RAID PCIe Controller Card w/ Battery 4x Cables

$189.00



Dell 5CT6D / FRH64 PERC H710 6GB/s RAID Controller w/ Battery picture

Dell 5CT6D / FRH64 PERC H710 6GB/s RAID Controller w/ Battery

$23.99



Adaptec 4-Port PCI-e SATA RAID Controller Card AAR-1430SA picture

Adaptec 4-Port PCI-e SATA RAID Controller Card AAR-1430SA

$17.99



Dell LSI SAS 9202-16e 16-Port PCI-E 6Gb SAS / SATA Controller Raid WPXP6 SAS9202 picture

Dell LSI SAS 9202-16e 16-Port PCI-E 6Gb SAS / SATA Controller Raid WPXP6 SAS9202

$34.99



HP LSI SAS9212-4i SAS SATA 6GB/S 4-Port PCIe RAID Controller Card 689576-001 picture

HP LSI SAS9212-4i SAS SATA 6GB/S 4-Port PCIe RAID Controller Card 689576-001

$24.99



HP Smart Array P420 / 2GB FBWC Controller Card Low Profile / Short Bracket RAID picture

HP Smart Array P420 / 2GB FBWC Controller Card Low Profile / Short Bracket RAID

$30.00



dell perc h710p Raid Card picture

dell perc h710p Raid Card

$75.00



03NDP Dell PCIe2.0x8 RAID Controller 6.0Gb/s SAS 9260-8i L3-25121-74B picture

03NDP Dell PCIe2.0x8 RAID Controller 6.0Gb/s SAS 9260-8i L3-25121-74B

$28.29