Results 1 to 7 of 7

Thread: touchpad tapping mod

  1. #1
    Junior Member
    Join Date
    Jan 2017
    Posts
    2

    touchpad tapping mod

    This problem has been addressed on this forum before but I can't make the answer work. Touchpad tapping is not enabled by default, but 'synclient TapButton1=1' from a console at run level 5 enables it. It does not work from run level 2 because that is not a graphical environment. In order to make the change permanent the advice is to go to /etc/X11/Xsession.d and add a file say '15x11-synaptics' with this content : synclient "TapButton1=1". The problem is that the file system is mounted read-only and chmod doesn't work. You can't find the file on the unmounted flash drive. How can you get this line in Xsession.d?

  2. #2
    Senior Member
    Join Date
    Dec 2012
    Posts
    152
    Did you try this command in a terminal:

    Code:
    sudo leafpad /etc/X11/Xsession.d/15x11-synaptics

  3. #3
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Greetings was698002 and welcome to the forum.

    All but one of the files in /etc/X11/Xsession.d are owned by root and read-only.
    However, one file, 45knoppix, is owned by root and also executable.

    I add a synclient command to this file, at its end, to tweak my touchpad.
    This is slightly simpler than adding a new file just for this one tweak.

    Quote marks are not necessary for the command.

    Of course, you'll need to have persistence working for this to make a permanent
    change to your system.

  4. #4
    Junior Member
    Join Date
    Jan 2017
    Posts
    2

    SOLVED -thanks

    Works fine on 7.7.2 despite the file description as an anachronistic holdover. Never would have found it without you. thanks.


    Quote Originally Posted by utu View Post
    Greetings was698002 and welcome to the forum.

    All but one of the files in /etc/X11/Xsession.d are owned by root and read-only.
    However, one file, 45knoppix, is owned by root and also executable.

    I add a synclient command to this file, at its end, to tweak my touchpad.
    This is slightly simpler than adding a new file just for this one tweak.

    Quote marks are not necessary for the command.

    Of course, you'll need to have persistence working for this to make a permanent
    change to your system.

  5. #5
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631
    Quote Originally Posted by was698002 View Post
    Works fine on 7.7.2 ... thanks.
    Was not aware of 7.7.2, but glad it works for you.
    The old forum record harks back to when I thought /etc/rc.local should work, and it didn't.

  6. #6
    Junior Member
    Join Date
    Mar 2012
    Location
    Brisbane, Australia
    Posts
    16
    The lack of touchpad support is the one single frustrating thing about Knoppix.
    What is persistence mode and how does one achieve it?
    Can you upload the specific changes that need to be made to Knoppix (text/file/folder) to make touchpad work reliably
    Other Linux distros have an app in settings that allows touchpad to be toggled. Why is Knoppix different?

  7. #7
    Member registered user
    Join Date
    Mar 2010
    Location
    USA
    Posts
    50
    Quote Originally Posted by wspc View Post
    The lack of touchpad support is the one single frustrating thing about Knoppix. What is persistence mode and how does one achieve it? Can you upload the specific changes that need to be made to Knoppix (text/file/folder) to make touchpad work reliably Other Linux distros have an app in settings that allows touchpad to be toggled. Why is Knoppix different?
    in 7.7.1 the program you are asking about in in a package called gpointing-device-settings. If you install that you will have control of it via GUI. The persistence stuff is covered in http://knoppix.net/forum/threads/319...th-persistence

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Fujinet 1.7.1 Atari 400 800 800XL 130XE 65XE XEGS Assembled, Tested, Working picture

Fujinet 1.7.1 Atari 400 800 800XL 130XE 65XE XEGS Assembled, Tested, Working

$99.99



Atari Home Computer Software/Books/Manuals/Magazines Lot - Read desc for details picture

Atari Home Computer Software/Books/Manuals/Magazines Lot - Read desc for details

$95.00



GreaseWeazle v4 board USB floppy drive adapter Retro All Formats picture

GreaseWeazle v4 board USB floppy drive adapter Retro All Formats

$35.00



Atari 400 / 800 Computer Memory Module 16K RAM PCB CX853 - Works Perfectly picture

Atari 400 / 800 Computer Memory Module 16K RAM PCB CX853 - Works Perfectly

$18.95



A8PicoCart Multicart for Atari 800xl /65xe / 130xe / XEGS picture

A8PicoCart Multicart for Atari 800xl /65xe / 130xe / XEGS

$16.95



Atari 410 Program Recorder repair w manual sheet/ adapter cord  picture

Atari 410 Program Recorder repair w manual sheet/ adapter cord

$23.99



ATARI Mouse with Adapter for ST, STE, Mega STE, TT Optical  - USA Seller picture

ATARI Mouse with Adapter for ST, STE, Mega STE, TT Optical - USA Seller

$29.99



Gotek USB Floppy Emulator v3.44 OLED (no speaker) Amiga Atari IBM Roland AKAI picture

Gotek USB Floppy Emulator v3.44 OLED (no speaker) Amiga Atari IBM Roland AKAI

$44.00



Atari 800 Home Computer 48K RAM In Original Box w/ Styro RF Switch Extra Games picture

Atari 800 Home Computer 48K RAM In Original Box w/ Styro RF Switch Extra Games

$349.30



DEFECTIVE Atari 810 Vintage Computer Disk Drive  powers on Unit Only Boo G3D picture

DEFECTIVE Atari 810 Vintage Computer Disk Drive powers on Unit Only Boo G3D

$49.29