-
Folders or Partitions becoming Read_Only by themselves Kn7.4.2 !!
Knop_7.4.2 Folders or Partitions becoming Read_Only by themselves
Hi
Does someone explains why and how some folders or partitions occur
to become "Read_Only" BY THEMSELVES ?
1- Once this happened after a libreOffice error.
I had to save all documents and initialize the partition (ReiserFS).
2- Recently one folder (only one I remarked!) became "Read_Only".
Impossible to make it "Writable" again BY ANY MEANS!
So I tried, using GParted,to "shorten one ReiserPartition" and "enlarge"
another one ReiserPartition.
These operations took so much time that I had to interrupt them.
Intrigated by this strange behaviour I looked again integrity of the disk.
Surprisingly "The bad Folder had gone out" leaving ALL GOOD on the disk.!
3- This could be an "empiric method" (with some high risks naturally)... when
no hope (after backup eventually).
Thanks
knp
-
BIS and TER REPAETITA...!
Problem almost solved...?
1- Knop7.2 was concerned in place of 7.4.2. But this is not essential.
Always I boot from iso file.
2- FileSystem concerned (and corrected also by GParted):
2a- NTfs..PRESENT. Ah! NTfs...not recommended for current usage b
but occasionnally only. Despite I avoid WRITING.
This is well known
"CHKDSK / f" recommended as always (twice).
Before GParted if possible.
2b- "A 2nd ReiserFS Partition" for knoppix installed on an USB_HDD.
This makes folders rigths access too strong when saving files.
To avoid such my problems it is worthwhile:
---2b1 to save files AND change ALL Rights to the LEAST way...Or
---2b2 to save files first on the associated "Fat Knoppix.img" which
allows AUTOMATICALLY the least RIGTHS. This avoid forgetting
in 2b1).
Naturally these methods break some security problem.
But Mr K.KNOPPER doing this automatically on the "knoppix.img" (boot-iso)
I may suppose it is not a great danger....Perhaps Viruses?
Thanks for all eventual remarks and advertisings
knp
Last edited by knp; 03-06-2017 at 07:56 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00

AS IS READ DESCRIP. Supermicro SuperServer 6026TT-HIBQRF 12-Bay 4x X8DTT-HIBQF
$215.00

Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD
$119.99

Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR
$96.60

NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 - 4X S25G NICs
$1999.97

Dell R740XD VxRail P570 24x 2.5” 2U CTO Server– 2x Gold 6240, H740p, 2x 1600W
$699.00

Dell PowerEdge FX2 FX2s Server 10GbE CMC Blade Enclosure Chassis
$274.99

Dell PowerEdge VRTX Rackmount Chassis w/4x PSUs 2x CMC Modules
$399.98

Dell Poweredge VRTX 25Bay 2.5" 2x PERC 8, 2xCMC, I/O 1GB Pass Through, 4x PS
$578.08

Nutanix Supermicro NXS2U2NL12G600 2x Node with Motherboards, Backplanes, & More
$450.00