Results 1 to 3 of 3

Thread: Problem with detection Monitor/Graphic card

  1. #1
    Junior Member
    Join Date
    Mar 2017
    Posts
    1

    Unhappy Problem with detection Monitor/Graphic card

    I replaced my original graphic card (ASUS EAH3850 512 MB DDR3) with a new (ASUS TURBO GTX1060 6GB) in my desktop.
    Probably, this HW replacement caused my problem.

    Start of Knoppix looks correctly. There are no errors / warnings in console.
    But, after starting a graphical interface, there is a black screen, and monitor shows only a message:
    "The current input timing is not supported by monitor display. Please change your input timing to 1920x1200@60Hz".

    Probably the resolution or the frequency are outside from monitor range. Or there is a bad/incompatible driver for my graphic card.

    So I tried to test a new version of Knoppix (version 7.7.1), - Booting from USB, but there is a same problem.
    I tested "CTRL"+"DEL"+"-" , but without responds.

    Also, I tried F2 and starts the knoppix with several parameters many times (always with a same negative result).

    Fox example, I tested these parameters:

    knoppix screen=1280x1024
    knoppix64 norandr
    knoppix64 xmodule=nv screen=1280x1024
    knoppix xserver=XFree86 xmodule=vesa
    knoppix screen=1280x1024 vsync=60 xmodule=svga
    knoppix screen=1280x1024 vsync=60 hsync=60
    knoppix screen=1920x1200 vsync=60 hsync=60

    I am using a desktop pc with this hardware:
    Processor AMD FX-8300, MotherBoard ASUS M5A97 LE R2.0, 16 GB RAM
    !! Graphic Card ASUS TURBO GTX1060 6GB
    !! monitor DELL U2412M (maximal res. 1920x1200 @ 60 Hz)

    I will happy for any suggestions, because this is frustrating for me (I haven't got my original Graphic card yet).
    Or, maybe some update of driver package in new version of Knoppix could helps.
    Thank you.

  2. #2
    did you use CD attached to graphic card and new screen? First connect old screen and install graphics card and make sure its working fine. After this you screen should work fine as well so do this and tell me results.

  3. #3
    Junior Member
    Join Date
    Aug 2017
    Posts
    1
    I would like to echo this question. I'm having the same problem. Has anyone solved this problem or have a work around?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Intel Xeon X5675 SLBYL 3.06GHz 6 Core LGA 1366 CPU Processor *km picture

Intel Xeon X5675 SLBYL 3.06GHz 6 Core LGA 1366 CPU Processor *km

$24.99



Intel Xeon X5680 SLBV5 3.33GHz 12MB LGA1366 6-Core CPU Processor picture

Intel Xeon X5680 SLBV5 3.33GHz 12MB LGA1366 6-Core CPU Processor

$34.99



CM8066002031501 INTEL XEON E5-2680V4 14 CORE 2.40GHz 35M 9.6 GT/s 120W PROCESSOR picture

CM8066002031501 INTEL XEON E5-2680V4 14 CORE 2.40GHz 35M 9.6 GT/s 120W PROCESSOR

$249.00



Intel Xeon E5-2680 v2 SR1A6 10 Core 2.8GHz LGA 2011 CPU Processor *km picture

Intel Xeon E5-2680 v2 SR1A6 10 Core 2.8GHz LGA 2011 CPU Processor *km

$69.99



Pair of  Intel Xeon X5675 3.06GHz CPU SLBYL picture

Pair of Intel Xeon X5675 3.06GHz CPU SLBYL

$45.00



Intel Xeon E5-2690V2 SR1A5 10 Core 3.00GHz 25MB 8 GT/S Processor picture

Intel Xeon E5-2690V2 SR1A5 10 Core 3.00GHz 25MB 8 GT/S Processor

$100.00



Intel Xeon E3-1225 Socket LGA1155 CPU Processor - Tested Working  picture

Intel Xeon E3-1225 Socket LGA1155 CPU Processor - Tested Working

$19.99



Intel Xeon Phi 5110P 60-Core 1.053GHz Coprocessor C1P87A 708360-001 225w picture

Intel Xeon Phi 5110P 60-Core 1.053GHz Coprocessor C1P87A 708360-001 225w

$40.00



Intel Xeon E5-2695v2 12 Core 2.40GHz 115W 30MB SR1BA CPU picture

Intel Xeon E5-2695v2 12 Core 2.40GHz 115W 30MB SR1BA CPU

$105.00



Intel SR0KX Xeon E5-2670 8-core 2.6Ghz 20M 8 GT/s QPI LGA2011 Processor CPU picture

Intel SR0KX Xeon E5-2670 8-core 2.6Ghz 20M 8 GT/s QPI LGA2011 Processor CPU

$19.90