How can I run well from the hard drive with persistence

[thriftee]

I now have 8.6.1 running well as an iso from the hard drive with persistence. I used MX19 to setup the partitions and control the boot. 1. create a partition to load/run Knoppix ISO. I used an SSD for max performance. I created a 20 gb partition ext4, but 8 gb would be plenty I think. On my system it is /dev/sda7. I labeled it 07-knoppixboot 2, create a KNOPPIX-DATA partition to hold the persistence data. I used 5 gb of my SSD for this on /dev/sda4 and it needs to be formatted as reiserfs and labeled KNOPPIX-DATA in caps. 3. make a flash drive of knoppix 8.6.1 to boot from. I used a dd frontend on antiX19 to create it. 4. boot from the flashdrive and press F3 5. type in knoppix no3d tohd=/dev/sda7 and press enter to boot 6. it should boot and copy the knoppix to /dev/sda7 7. shutdown and reboot into MX19 8. in root terminal mkdir /media/sda7 9. mount /dev/sda7 /media/sda7 10. copy linux* and minirt.gz from the flashdrive to the KNOPPIX folder on /media/sda7 11. edit /KNOPPIX/knoppix-data.inf on /media/sda7 4 in the line below refers to /dev/sda4 4 /KNOPPIX-DATA reiserfs 12. create custom.cfg in /boot/grub # # custom.cfg # menuentry "Knoppix64 8.6.1 from HD (on /dev/sda7)" { insmod part_msdos insmod ext2 set root='hd0,msdos7' linux /KNOPPIX/linux64 knoppix_dir=/KNOPPIX lang=en no3d initrd /KNOPPIX/minirt.gz } 13. reboot without flashdrive, go to custom.cfg option at bottom and press e to edit 14. add mkimage at end of linux /KNOPPIX line then F10 to boot. When it boots it should create the persistence files on /dev/sda4 15. make a very minor change to something so you can see if your changes get saved when you reboot. You could create a text file in your home folder. 16. reboot, taking custom.cfg option by just pressing enter on it. (no mkimage option) 17. see if your changes were saved. If anyone tries this let me know how it works out. .........................sorry, the forum won't let me format the text. I tried twice.