This is a wild guess from the furthest reaches of my tiny little mind. When you recompress try using the -9 flag.
why is my iso bigger if i only decompress and recompress it and how can i avoid that?
the KNOPPIX file was about 7-8mb bigger then before
This is a wild guess from the furthest reaches of my tiny little mind. When you recompress try using the -9 flag.
neither mkisofs nor create_compressed_fs takes a -9 parameter, what are you trying to tell me?
![]()
i discovered it doesn't seem to be the compression but the decompression
i mount the KNOPPIX file with
insmod cloop file=KNOPPIX
mount /dev/cloop somedir
somedir then has about 1.8gb
if i copy it to a normal dir that suddenly has 2.0gb
i used cp -a -v
any clues how to fix this?![]()
I think 1.8 GB on an iso9660 filesystem will take up 2GB on an ext2 filesystem, if I get your problem correctly, then it's just the extra overhead of ext2 compared to iso9660
hm might be![]()
<edit>
eh...just catched the thougt:
i m not using ext2 but ext3
any chance that this may be part of the reason?
</edit>
but then why on earth is my image growing![]()
i now converted a partition to ext2 _and_ created the KNOPPIX file from the cloop mounted original file (sound weird? it is!)
and guess what? still growing...
that brings me back to a compression problem![]()
damn it
I don't pretend to know why, but I had the same problem and found that if you use an xfs partition instead of ext2 or ext3, then the problem goes away.
I also found that if I removed some large packages using apt-get and then added them later, the overhead incurred by using ext2 or ext3 previously was reduced.
Hope this helps.![]()

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb
$374.99
Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00
Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD
$99.99
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores | 32gb | HBA330 | 2x 1...
$324.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$378.93
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD
$149.99
Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO
$248.00
Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2690 v3 | 64gb Ram | 2x 1600W
$524.99
Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD
$119.99
Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00