-
SBLive!?? C-Media? Sound issues
I apologize for the noob question. I have always been a Windows user, but have lately decided to consider shedding the corporate evil that is Microsoft. I chose to test out Linux with the Knoppix Live-On-CD. During the boot process, my SBLive! is recognized, and everything boots as normal. But i dont get any sound. When going though the boot process by typing in "Expert" i was able to activate the "(re)configure sound driver" option. Going through the menus, i was told that i had a CM something. I immediately recognized this as my C-Media on board sound. A test clip was played, which i couldn't hear. I went into the config menu and chose my hardware as a SBLive! But it wouldn't work, Which i thought was odd, because the card was detected. I rebooted, and with the next book just loaded "Knoppix Level 5". Everything loaded as normal (SBLive! detected). Once logged in i plugged my speakers into the C-Media onboard sound, and tried a clip, it worked. I would like to know how to make my SBLive! work, and why its dectecting it and installing the necessary drivers, but than using the C-Media.
Thanx for reading the Noobish question!!!
-
Senior Member
registered user
Go into your BIOS and disable the onboard sound and enable the option for Sound Blaster support and that should work although when I did this last week I had to modprobe my joystick for the sound to work once from the CD. Also boot with the alsa cheat code. eg knoppix alsa at the boot: prompt. Almost forgot if the BIOS has an auto option for the selection of the sound disable that as well and make sure the card is not in the slot next to the AGP if you are using it causes nothing but problems at least for me YMMV.
-
I have the EXACT problem!! I still haven't been able to use my "Audigy" driver for my card like knoppix said during boot, but once knoppix is done with loading hardware and what not at the bottom at the boot: prompt type "Knoppix alsa" it's a cheat code for audio. It uses my SB Live Audigy card for sound but I'm not sure if it's to it's full potential.
Hope this helps!!
Edit: I see someone has already told you while I was typing, lots help here!!!
-
Hmmm wow ive tried everything... I guess it just hates me... Its just so wierd that it detects and installs the drivers for the SBLive! But uses the C-Media on board sound instead... *sigh* i guess it hates me! Thanx for all your advice!!
Similar Threads
-
By frank34 in forum The Lounge
Replies: 3
Last Post: 07-26-2004, 02:49 PM
-
By StopError in forum General Support
Replies: 0
Last Post: 03-17-2004, 03:00 AM
-
By transami in forum Hdd Install / Debian / Apt
Replies: 11
Last Post: 12-14-2003, 10:50 PM
-
By Onetrack in forum Hardware & Booting
Replies: 3
Last Post: 07-28-2003, 04:36 AM
-
By Only1KW in forum Hardware & Booting
Replies: 0
Last Post: 02-02-2003, 09:29 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$378.93

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb
$374.99

Dell PowerEdge R240 Intel Xeon E-2224 3.50GHz 8GB DDR4 ECC NO HDD 250W
$285.97

Dell Poweredge R810 4x Xeon X7560 2.26ghz 32-Cores | 256GB | 3x Trays | H700
$289.99

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD
$149.99

Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO
$488.00

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W
$409.99

Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD
$99.99

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores | 32gb | HBA330 | 2x 1...
$324.99