-
Trouble installing stuff (with apt-get and from source)
When i try to install something from apt-get i usually get errors like this:
Code:
root@knoppix:/home/jerome187# apt-get install kde-devel
Reading Package Lists... Done
Building Dependency Tree... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
Sorry, but the following packages have unmet dependencies:
kde-devel: Depends: kdelibs-dev
Depends: libarts-dev but it is not going to be installed
Depends: libkmid-dev but it is not going to be installed
Depends: kdebase-dev but it is not going to be installed
Depends: kdbg but it is not going to be installed
Depends: kde-designer but it is not installable
Depends: kprof but it is not going to be installed
Depends: dcopperl but it is not going to be installed
Depends: dcoppython but it is not going to be installed
Depends: libkdexparts-dev but it is not going to be installed
Depends: koffice-dev but it is not going to be installed
E: Sorry, broken packages
root@knoppix:/home/jerome187#
and when i try to install something from source it gives me tons of dependices and when i try to install these dependices via apt-get i get errors like above.
i know apt-get is setup properly because i DID get one think working right, gkrellm2. installed perfectly, but anything else i've tryed dosent work.
is there anyway to fix this so i can actually use apt-get correctly?
TIA
jerome187
-
Senior Member
registered user
It is very hard to fix the system that is built from mixing distribution(testing/unstable). There is limitation in the apt-get dependency logic which from my experiencel only support one way upgrade, despite how flexible people are claiming about apt-get.
you said you have apt-get setup correctly because you can pull in some other packages, the truth is, the only way apt-get can be 100% sure about setup correctly is 'stable' without any third party backport. The reason that you can have some packages work is that they have less dependency on others. KDE is almost an acid test of how 'broken' a distribution is, well I have seen other situation that is even worse(like I have installed a woody system without locale package, add Xfree86 4.3 backport which has a newer debconf then later when I want to add back locale, apt-get barks that the debconf is too new!).
The only suggestion I can think of is to do a apt-get dist-upgrade having 'unstable' as the only source(I assume you have a KNOPPIX hd-install) then retry what you wanted to do. Make sure you remove every other source site other than ftp.debian.org.
I have forgotten how many times I have deboostrap from scratch(I use woody + backports) in ironing out these weird dependency problems in apt-get.
-
Senior Member
registered user
You may want to take a look at this thread the process will be similar for you.
-
I did a apt-get dist-upgrade and it did its thing with no problems, but it dident seem to fix anything. heres what i got for trying to apt-get kdelibs3....
Code:
root@knoppix:/home/jerome187# apt-get install kdelibs3
Reading Package Lists... Done
Building Dependency Tree... Done
The following extra packages will be installed:
kdelibs3-bin libqt2 libsocks4
The following packages will be REMOVED:
ark k3b kaddressbook kalarm kamera kandy kappfinder karbon karm kasteroids kate
kate-plugins kbattleship kbounce kcalc kcharselect kchart kcmlinuz kcoloredit
kcontrol kcron kdat kdeaddons-kfile-plugins kdeadmin-kfile-plugins kdebase
kdebase-bin kdebase-kio-plugins kdegraphics-kfile-plugins kdelibs-bin kdelibs-data
kdelibs4 kdemultimedia-kfile-plugins kdenetwork-kfile-plugins kdepasswd kdepim
kdepim-kfile-plugins kdepim-libs kdeprint kdesktop kdessh kdevelop kdevelop-data kdf
kdm kdvi kedit kfax kfind kfloppy kformula kgeo kget kghostview kgpgcertmanager
khelpcenter khexedit kicker kiconedit kivio kjots klaptopdaemon klipper kmahjongg
kmail kmailcvt kmenuedit kmix kmrml knotes koffice-data koffice-libs kompare
konq-plugins konqueror konqueror-nsplugins konsole kooka korganizer koshell kpackage
kpager kpaint kpersonalizer kpf kpilot kppp kpresenter krdc kreversi krfb kruler
kscd ksmserver ksnapshot ksokoban ksplash kspread kstars ksync ksysguard ksysv
kteatime ktimer ktip kugar kuickshow kuser kview kviewshell kwin kxconfig
libkdegames1 libkdenetwork2 libkonq4 libkscan1 lisa secpolicy
The following NEW packages will be installed:
kdelibs3 kdelibs3-bin libqt2 libsocks4
0 packages upgraded, 4 newly installed, 117 to remove and 1 not upgraded.
Need to get 8683kB of archives. After unpacking 163MB will be freed.
Do you want to continue? [Y/n] n
is there a knoppix cd thats compatiable with debians current stable phase of its distro? like maybe a older knoppix or something?
-
Senior Member
registered user
Why are you trying to install kdelibs3 that is for KDE 2.2.
Code:
[04:48 PM Sat Jun 28: stephen @ ~]
>$ apt-cache policy kdelibs3
kdelibs3:
Installed: (none)
Candidate: 4:2.2.2-13
Version Table:
4:2.2.2-13.woody.7 0
500 http://security.debian.org stable/updates/main Packages
4:2.2.2-13 0
990 http://ftp.de.debian.org testing/main Packages
As you can see this will remove KDE 3.1 and downgrade the install. you should be installing the packages from testing/unstable.
-
o oops, i had no idea :P i figured sence it had a 3 in its name it was for KDE3
i want to install kopote and kuake, both have dependices for Qt3 headers and libaries, its there a simmilar package in apt-get that i can install so these will be fulfilled?
-
Senior Member
registered user

Originally Posted by
jerome187
o oops, i had no idea :P i figured sence it had a 3 in its name it was for KDE3
i want to install kopote and kuake, both have dependices for Qt3 headers and libaries, its there a simmilar package in apt-get that i can install so these will be fulfilled?
Yes damn confusing. I believe kopete is already installed to check apt-cache policy kopete will tell you what version if any is installed and where it came from with usually other verisons that are available to install.
To install apt-get -s install kopete when you get the errors saying the package cannot be install because package version xy is installed and it needs version yz then apt-cache policy < package > for the package that needs to be installed to check available versions if say the unstable version is needed then apt-get -s install < package >/unstable to simulate the install and check for more errors if none remove the -s to install. Then go back and simulate the install of kopete to check for more errors if there are repeat the process until there are no unsatisified dependencies causing the errors and kopete will install.
-
Code:
root@knoppix:/home/jerome187# apt-get -s install kopete
Reading Package Lists... Done
Building Dependency Tree... Done
E: Couldn't find package kopete
are you usre kopete is in atp-get? i searched for in on debian.org's package database and i couldent find it in there (searched in stable, testing, and unstable)
-
Senior Member
registered user
do a:
apt-cache search kopete
to see if it is in your package lists.
as well as trying:
apt-get -s install kopete/unstable
you might want to try:
apt-get -s -t unstable install kopete ( and maybe -t stable)
IIRC apt-get -s install kopete/unstable and apt-get -s -t unstable install kopete function slightly different. You will have to have a repository URI in your sources list that has the kde packages you want, you might want to look at www.apt-get.org for unofficial package repositories and their sources.list URI's.
HTH
rock
-
www.apt-get.org is awsome!! found a kopete.deb and installed it without any problems.
why itsnt this on the "offical" debian site? i think there apt-get system has some problems. i used gentoo for a while until i acidently killed my system, and there package system was GREAT. anyone could make a package and submit it to the online database, looks like debian dosent really allow that
so it results in lots of apps missing from their database. o well
Similar Threads
-
By mike23 in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 05-26-2005, 11:41 AM
-
By geopfm in forum General Support
Replies: 3
Last Post: 02-14-2005, 10:35 PM
-
By planetbeing in forum Ideas
Replies: 3
Last Post: 12-06-2004, 06:58 PM
-
By ikkenorsk in forum General Support
Replies: 2
Last Post: 07-08-2004, 11:02 PM
-
By gizmu in forum Customising & Remastering
Replies: 0
Last Post: 04-04-2003, 08:48 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Dell 6P85J 4TB ST4000NM0063 7.2k 6Gb/s 3.5” SAS SED Hard Drive with Tray
$39.99

Western Digital HUS726T4TAL5204 4TB 7.2K SAS 12Gb/s 3.5" 512e HDD NetApp X375A
$64.00

DELL 2TB Enterprise HDD (7200RPM, 3.5", SATA III, 128MB Cache) HUS722T2TALA600
$49.95

Seagate ST8000DM004 8TB 3.5" 6Gb/s 256MB SATA HDD P/N: 2CX188-300 Tested
$149.99

Seagate ST4000NM0034 Enterprise 4TB 7200RPM SAS 12Gb/s HDD v4
$39.00

Seagate ST500DM009 BarraCuda 500 GB 3.5" SATA III Desktop Hard Drive
$14.99

HGST HUS726060ALE610 0F23001 6TB HDD 3.5" SATA 6Gb/s 7.2K Hard Drive (V6315)
$69.95

HGST HUA723030ALA640 3TB SATA 7200 RPM 3.5 in Enterprise HDD | 0F14044 (100%)
$45.00

(ST8000NM0045) SEAGATE ENTERPRISE 8TB 7200RPM 4Kn SATA 6Gb/s 3.5" HARD DRIVE
$199.99

Seagate ST8000NM0075 Enterprise Capacity 3.5 HDD 8TB SAS Hard Drive 8TB EXOS
$184.99