--Does the machine freeze up entirely? If so, I suggest you get yourself a copy of memtest86 and see if you have bad RAM.
Originally Posted by kjkostuk
When installing Knoppix on my hard drive I get the following error:
<1> Unable to handle kernel NULL pointer dereference at virtual addresss 00000094.
The machine I am trying to install this on is a PPro 200MHz with 128MB of memory. I am installing this on a 6GB drive with 1GB allocated to swap.
Any help on indentifying the source of the problem would be appreciated.
--Does the machine freeze up entirely? If so, I suggest you get yourself a copy of memtest86 and see if you have bad RAM.
Originally Posted by kjkostuk
BTW, 1Gig is way too much swap. Cut this in half at least.

(2) Seagate SAS Hard Drive Exos 7E8 3TB 7200RPM 128MB 12Gb/s 3.5 ST3000NM0035
$49.99
Seagate BarraCuda ST3000DM008 3TB Internal SATA 6Gb 3.5" Hard Drive 7200RPM 64MB
$91.99
Seagate ST500DM009 BarraCuda 500 GB 3.5" SATA III Desktop Hard Drive
$14.99
HDD 3.5" SATA Hard Drive with Windows 10/Win 11 64x Installed Legacy
$35.00
Toshiba MG04ACA400 4TB 3.5-inch SATA 6 Gb/s 7,200 RPM Internal Hard Drive
$49.99
ST6000NM0034 DELL 6TB 7.2K 12G SAS 512E 3.5" ENTERPRISE HARD DRIVE 8D1V4 08D1V4
$54.99
Seagate ST28000NM001C 28TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$669.99
Toshiba 14TB MG07 MG07ACA14TEY 7.2K RPM SATA 6Gb/s 512e 3.5" Enterprise HDD
$299.00
Seagate 6TB HDD ST6000NM0034 7.2K 3.5" SAS 12Gb/s (NOT FOR PC - FOR SERVER ONLY)
$87.00
Dell EMC WD-HITACHI H5H72101CLAR10T0 10TB 7.2K SAS 12Gb/s SED 3.5in A POH 0-50k
$189.99