/etc/apt/sources.list
#Mplayer, Mencoder
deb http://marillat.free.fr/ unstable main
apt-get install mencoder-686 mplayer-686 avidemux
next gmplayer
mplayer + mencoder = rip
cvs ver is![]()
cheers
I've been working on this for 3 days!
MPlayer won't launch an GUI interface.
Will play from command line.
./configure --enable-gui --enable-png
Installs no errors of any kind.
Also I can't find gui.conf and what to put in it.
I was reading the README, and it said if you had any
library type error's to do this: ldd ./mplayer
NOTE: I HAD NO ERROR AT ALL!
libmad.so.0 => /usr/lib/libmad.so.0 (0x4001f000)
libvorbis.so.0 => /usr/lib/libvorbis.so.0 (0x40036000)
libogg.so.0 => /usr/lib/libogg.so.0 (0x40054000)
libpng12.so.0 => /usr/lib/libpng12.so.0 (0x40058000)
libz.so.1 => /lib/libz.so.1 (0x40080000)
libjpeg.so.62 => /usr/lib/libjpeg.so.62 (0x4008d000)
libasound.so.2 => /usr/lib/libasound.so.2 (0x400aa000)
libdl.so.2 => /lib/libdl.so.2 (0x40131000)
libpthread.so.0 => /lib/libpthread.so.0 (0x40134000)
libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0x40183000)
libncurses.so.5 => /lib/libncurses.so.5 (0x401d3000)
libnsl.so.1 => /lib/libnsl.so.1 (0x40212000)
libgtk-1.2.so.0 => /usr/lib/libgtk-1.2.so.0 (0x40225000)
libgdk-1.2.so.0 => /usr/lib/libgdk-1.2.so.0 (0x4034b000)
libgmodule-1.2.so.0 => /usr/lib/libgmodule-1.2.so.0 (0x4037e000)
libglib-1.2.so.0 => /usr/lib/libglib-1.2.so.0 (0x40381000)
libXi.so.6 => /usr/X11R6/lib/libXi.so.6 (0x403a2000)
libXext.so.6 => /usr/X11R6/lib/libXext.so.6 (0x403aa000)
libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x403b7000)
libm.so.6 => /lib/libm.so.6 (0x40474000)
Most all of these are there! (An link to --> the file)
Put /usr/local/lib in /etc/ld.so.conf and did ldconf
ld.so.conf:
/lib
/usr/lib
/usr/local/lib
/usr/X11R6/lib
/usr/i486-linuxlibc1/lib
Some kind of libray problem (link) here?
Thanks....
/etc/apt/sources.list
#Mplayer, Mencoder
deb http://marillat.free.fr/ unstable main
apt-get install mencoder-686 mplayer-686 avidemux
next gmplayer
mplayer + mencoder = rip
cvs ver is![]()
cheers
What command are you issuing to start mplayer?
The mplayer gui is started by using "gmplayer"
Thanks Roszczuk !!!
Up and Playing: DVD's !
su <password>
mplayer -dvd 1 -dvd-device /dev/sr1
NOTE: If libdvdread Error - it won't play that DVD, I have quite a few that it won't play.
Problem with subfont.ttf,
REF: http://www.starbreaker.net/linux.php?page_id=1
OR launch gmplayer from root to take care of this problem!
I am trying to follow these instructions for installing MPlayer.Originally Posted by Roszczuk
apt-get install mencoder-686 mplayer-686 avidemux
--> This works without any issues.
However,
next gmplayer
failed because "next" (the command) is not found.
Similarly the remaining two commands also failed.
I am trying to listen to Real Audio files from www.marketplace.org using MPlayer.
Thanks for assisting.

Dell 6P85J 4TB ST4000NM0063 7.2k 6Gb/s 3.5” SAS SED Hard Drive with Tray
$39.99
Western Digital HUS726T4TAL5204 4TB 7.2K SAS 12Gb/s 3.5" 512e HDD NetApp X375A
$64.00
DELL 2TB Enterprise HDD (7200RPM, 3.5", SATA III, 128MB Cache) HUS722T2TALA600
$49.95
(ST8000NM0045) SEAGATE ENTERPRISE 8TB 7200RPM 4Kn SATA 6Gb/s 3.5" HARD DRIVE
$199.99
Seagate ST500DM009 BarraCuda 500 GB 3.5" SATA III Desktop Hard Drive
$14.99
Seagate ST4000NM0034 Enterprise 4TB 7200RPM SAS 12Gb/s HDD v4
$39.00
Dell ST6000NM0034 1HT27Z-150 NWCCG 6TB SAS 3.5 7.2K ENTERPRISE SERVER DRIVE
$68.99
HGST HUS724040ALA640 HDD 4TB SATA 6Gb/s 7.5K 3.5" 0F19459 512 b/s
$78.00
Seagate ST8000NM0075 Enterprise Capacity 3.5 HDD 8TB SAS Hard Drive 8TB EXOS
$184.99
Seagate ST1000VM002 1TB 5900RPM 3.5" SATA 6Gb/s HDD | PC DVR CCTV | | 1Y
$55.95