/etc/apt/sources.list
#Mplayer, Mencoder
deb http://marillat.free.fr/ unstable main
apt-get install mencoder-686 mplayer-686 avidemux
next gmplayer
mplayer + mencoder = rip
cvs ver is![]()
cheers
I've been working on this for 3 days!
MPlayer won't launch an GUI interface.
Will play from command line.
./configure --enable-gui --enable-png
Installs no errors of any kind.
Also I can't find gui.conf and what to put in it.
I was reading the README, and it said if you had any
library type error's to do this: ldd ./mplayer
NOTE: I HAD NO ERROR AT ALL!
libmad.so.0 => /usr/lib/libmad.so.0 (0x4001f000)
libvorbis.so.0 => /usr/lib/libvorbis.so.0 (0x40036000)
libogg.so.0 => /usr/lib/libogg.so.0 (0x40054000)
libpng12.so.0 => /usr/lib/libpng12.so.0 (0x40058000)
libz.so.1 => /lib/libz.so.1 (0x40080000)
libjpeg.so.62 => /usr/lib/libjpeg.so.62 (0x4008d000)
libasound.so.2 => /usr/lib/libasound.so.2 (0x400aa000)
libdl.so.2 => /lib/libdl.so.2 (0x40131000)
libpthread.so.0 => /lib/libpthread.so.0 (0x40134000)
libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0x40183000)
libncurses.so.5 => /lib/libncurses.so.5 (0x401d3000)
libnsl.so.1 => /lib/libnsl.so.1 (0x40212000)
libgtk-1.2.so.0 => /usr/lib/libgtk-1.2.so.0 (0x40225000)
libgdk-1.2.so.0 => /usr/lib/libgdk-1.2.so.0 (0x4034b000)
libgmodule-1.2.so.0 => /usr/lib/libgmodule-1.2.so.0 (0x4037e000)
libglib-1.2.so.0 => /usr/lib/libglib-1.2.so.0 (0x40381000)
libXi.so.6 => /usr/X11R6/lib/libXi.so.6 (0x403a2000)
libXext.so.6 => /usr/X11R6/lib/libXext.so.6 (0x403aa000)
libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x403b7000)
libm.so.6 => /lib/libm.so.6 (0x40474000)
Most all of these are there! (An link to --> the file)
Put /usr/local/lib in /etc/ld.so.conf and did ldconf
ld.so.conf:
/lib
/usr/lib
/usr/local/lib
/usr/X11R6/lib
/usr/i486-linuxlibc1/lib
Some kind of libray problem (link) here?
Thanks....
/etc/apt/sources.list
#Mplayer, Mencoder
deb http://marillat.free.fr/ unstable main
apt-get install mencoder-686 mplayer-686 avidemux
next gmplayer
mplayer + mencoder = rip
cvs ver is![]()
cheers
What command are you issuing to start mplayer?
The mplayer gui is started by using "gmplayer"
Thanks Roszczuk !!!
Up and Playing: DVD's !
su <password>
mplayer -dvd 1 -dvd-device /dev/sr1
NOTE: If libdvdread Error - it won't play that DVD, I have quite a few that it won't play.
Problem with subfont.ttf,
REF: http://www.starbreaker.net/linux.php?page_id=1
OR launch gmplayer from root to take care of this problem!
I am trying to follow these instructions for installing MPlayer.Originally Posted by Roszczuk
apt-get install mencoder-686 mplayer-686 avidemux
--> This works without any issues.
However,
next gmplayer
failed because "next" (the command) is not found.
Similarly the remaining two commands also failed.
I am trying to listen to Real Audio files from www.marketplace.org using MPlayer.
Thanks for assisting.

TP-Link TL-SG105 5-Port Gigabit Ethernet Unmanaged Metal Desktop Network Switch
$19.99
TP-Link TL-SG1048 48-Port Gigabit Rackmount Switch New Factory Sealed
$199.99
Cisco WS-C3650-12X48UR-L 48-Port Stackable Layer 3 8x10G SFP+ Port Switch
$129.99
NETGEAR GS308EP Essential Series 8-Port Gigabit PoE+ Unmanaged Switch
$49.99
10-Port Gigabit PoE Network Switch with 8 PoE+ Ports with 2 Combo SFP Slots 125W
$39.99
TP-Link TL-SG2210P 10-Port Gigabit Smart Switch w/ 8-Port PoE+ NO AC SKU 25597
$36.98
Arista DCS-7050SX-64-R 48P 10GbE SFP+ 4P 40GbE QSFP+ RA Switch
$115.00
Arista DCS-7010T-48-R 48P 1GbE 4P 10GbE SFP+ RA Switch with rack mounts
$69.00
Linksys LGS328MPC 24-Port Managed Gigabit PoE+ Switch with 4 10G SFP+ Uplinks
$224.95
TP-Link 5-Port Gigabit Unmanaged Ethernet Switch Network Expansion TL-SG105
$19.95