From memory the virtual terminals are started from /etc/inittab. You might be able to modify this file to disable the virtual terminals. Terminals are usually started by getty or similiar.
Hello,
How does one go about disabling the Virtual Terminal? I just want to see an image basically once 'X' gets loaded up. I know I can do this by Compiling a new 2.4.20 Kernel, but from what I have read its a pain in the butt and from early tests, it has failed for me.
So, one, is there an easy way out of this by sending a Kernel Boot Parameter to disable this?
If not and I need to build a new kernel, where can I get the appropriate XFS Patch? And once applied, I just do the normal make dep clean bzimage modules modules_install install and overwrite the vmlinuz in the boot.img with the new or? Thanks for all help in advance.
mark
From memory the virtual terminals are started from /etc/inittab. You might be able to modify this file to disable the virtual terminals. Terminals are usually started by getty or similiar.
From memory the virtual terminals are started from /etc/inittab. You might be able to modify this file to disable the virtual terminals. Terminals are usually started by getty or similiar.
I checked ou the inittab like you said, but unless I am 'blinded', I didn't fiind what I was looking for so I just proceded with building a new kernel which worked in full success. And for those out there searching how to build a new kernel, I personally found it to be surprising easy and successfull compared to some other post.
Here's what I did for reference:
Downloaded Linux-2.4.20.
Added the XFS Patch
Configured Kernel from Previous Config and then Modded
Loaded Knoppix Patch in /usr/src dir
make dep clean bzImage modules modules_install
cp arch/i386/boot/bzImage /boot/vmlinuz-2.4.20 (i'm fairly sure this is the command)
cp System.map /boot/System.map-2.4.20
Took the boot.img file, and mounted it (mount -t msdos boot.img boot -o loop=/dev/loop0 )
replaced the vmlinuz file with the newly created one.
unmount boot
Replace boot.img with the newly made one
Recreate ISO Image and vwal
NOTE: Some Information taken from the Docs Section ffrom the KernelCustomize Howto and KnoppixRemastering Howto.

Cisco Nexus N9K-C92160YC-X 48P 25GbE SFP28 6P QSFP+/QSFP28 PE Switch
$439.00
Cisco WS-C3650-12X48UR-L 48-Port Stackable Layer 3 8x10G SFP+ Port Switch
$129.99
Cisco Catalyst C9130AXI-B WiFi 6 802.11ax Wireless Access Point Brand New
$101.99
Cisco Acacia DP04QSDD-E25-840 400G QSFP-DD Coherent DCO Transceiver Module
$699.99
Cisco | N3K-C3232C | 32-Port 100G QSFP Network Switch W/ 2x PSU, 2x Power Cords
$205.00
Cisco C9200-48P-E Cisco POE Network Switch
$749.99
New Sealed Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Transceiver Module *US
$17.00
Genuine Cisco SFP-10G-SR 0-2415-03 10 Gigabit Transceiver
$5.40
Cisco QSFP-40G-SR-BD Module 10-2945-02 NEW CLAMSHELL
$45.50
Cisco C3850-NM-2-40G Cisco Catalyst 3850 2x40GE Network Module- Fast Shipping
$269.00