-
Junior Member
registered user
Howto Disable Virtual Terminall?
Hello,
How does one go about disabling the Virtual Terminal? I just want to see an image basically once 'X' gets loaded up. I know I can do this by Compiling a new 2.4.20 Kernel, but from what I have read its a pain in the butt and from early tests, it has failed for me.
So, one, is there an easy way out of this by sending a Kernel Boot Parameter to disable this?
If not and I need to build a new kernel, where can I get the appropriate XFS Patch? And once applied, I just do the normal make dep clean bzimage modules modules_install install and overwrite the vmlinuz in the boot.img with the new or? Thanks for all help in advance.
mark
-
From memory the virtual terminals are started from /etc/inittab. You might be able to modify this file to disable the virtual terminals. Terminals are usually started by getty or similiar.
-
From memory the virtual terminals are started from /etc/inittab. You might be able to modify this file to disable the virtual terminals. Terminals are usually started by getty or similiar.
-
Junior Member
registered user
I checked ou the inittab like you said, but unless I am 'blinded', I didn't fiind what I was looking for so I just proceded with building a new kernel which worked in full success. And for those out there searching how to build a new kernel, I personally found it to be surprising easy and successfull compared to some other post.
Here's what I did for reference:
Downloaded Linux-2.4.20.
Added the XFS Patch
Configured Kernel from Previous Config and then Modded
Loaded Knoppix Patch in /usr/src dir
make dep clean bzImage modules modules_install
cp arch/i386/boot/bzImage /boot/vmlinuz-2.4.20 (i'm fairly sure this is the command)
cp System.map /boot/System.map-2.4.20
Took the boot.img file, and mounted it (mount -t msdos boot.img boot -o loop=/dev/loop0 )
replaced the vmlinuz file with the newly created one.
unmount boot
Replace boot.img with the newly made one
Recreate ISO Image and vwal
NOTE: Some Information taken from the Docs Section ffrom the KernelCustomize Howto and KnoppixRemastering Howto.
Similar Threads
-
By mastercheef86 in forum Knoppix DVD
Replies: 6
Last Post: 03-05-2005, 10:00 AM
-
By TimWhite in forum Hardware & Booting
Replies: 1
Last Post: 02-22-2005, 07:38 PM
-
By kenblood in forum MS Windows & New to Linux
Replies: 7
Last Post: 09-07-2004, 09:24 AM
-
By ptesone in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 04-20-2004, 04:53 AM
-
By orang55 in forum General Support
Replies: 0
Last Post: 06-20-2003, 04:14 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Crucial MX500 1TB 2.5" SATA III Internal SSD CT1000MX500SSD1
$102.99

Samsung 860 EVO 250GB SSD MZ-76E250 2.5" SATA III Solid State Drive -
$39.99

Netac 2TB 1TB 512GB 256GB Internal SSD 2.5inch SATAIII Solid State Drive lot
$549.00

Samsung 2.5" 870 EVO SSD SATA III 250GB 500GB 1TB Internet Solid State Drive Lot
$90.00

Samsung 256 GB Internal SATA SSD Fully Tested 50%-79% Health
$24.00

Fanxiang 256GB 512GB 1TB 2TB 4TB SSD Lot 2.5'' SATA Internal Solid State Drive
$42.99

Fanxiang 1/2/5/10Pcs 2.5'' SATA SSD Lot 1TB 2TB 4TB 512GB 256GB TLC Internal SSD
$129.99

2 PACK 128 GB SSD M.2 2280 SATA Solid State Drive Major Brands, Samsung, LiteON
$28.00

Micron MTFDDAK256TBN 256 GB, Internal ,2.5" SSD
$23.00

EDILOCA EN880E 1TB M.2 NVMe PCIe Gen4 Internal SSD for Laptop/PC
$115.00