-
Remasting from damn small linux
I recently tried to remaster from damn small linux, but was confronted with the fact that there is no mkisofs command... I'm kinda new to the whole remastering and was wondering if anyone had any success, and if so, how did you do it?
-
I fixed my own problem, but now i'm experiencing some aweful bloat issues. I first noticed it, and then ran a test. I copied damn small linux over, and then without editing anything, I remade it. The iso is now 129mb, instead of 50mb... I didnt remove, or add anything. So I have no idea whats going on. Any ideas?
I used knoppix 3.1 to remaster damn small linux. Maybe that is the issue?
-
Junior Member
registered user
Did you re-compress the KNOPPIX file as per the directions here? Most specifically, this line:
Code:
#mkisofs -R /mnt/hda3/KNOPPIX | create_compressed_fs - 65536 > /mnt/hda3/NewCD/KNOPPIX/KNOPPIX
-
I sure did. I used that one and this beast of a command:
mkisofs -R -U -V "KNOPPIX.net filesystem" -P "KNOPPIX www.knoppix.net" -hide-rr-moved -cache-inodes -no-bak -pad /mnt/hda1/knx/source/KNOPPIX | nice -5 /usr/bin/create_compressed_fs - 65536 > /mnt/hda1/knx/master/KNOPPIX/KNOPPIX
Which basically does the same exact thing.
-
To me, it seems that you didn't unmount the proc-filesystem before remastering... am I right ?
In the chrooted environment, try to : umount -l -f /proc
before building the ISO...
Hope it helped.
-
Junior Member
registered user
libc6
I have been playing with damn small and an into a problem with libc6 which errors saying it isn't fully installed. Along with ethereal. . .
I have searched google and so forth to no avail. . .any ideas or is it something obvious?
-
The new 0.4.2 version seems to have a problem with apt-get, even after unpacking the dpkg.tar.gz !
Either I am doing somthing wrong, or adding dpkg.tar.gz doesn't work for the 0.4.2 version..
-
Junior Member
registered user
Actually I was having the same issue when I was playing with DS. I finally gave up and took Model K and updated the 35MB ISO then built up from there. I had even tried upgrading dpkg to no avail on DS.
-J-
-
cookiepuss : where did you get model-K ? (or did you still have it laying around somewhere ?)
I ask this 'cause the links on the "Customizations" page didn't seem to work...
-
Junior Member
registered user
L.A.S. Knoppix 0.3b
I have had it for some time now. If you want what I have so far you can find it here: http://localareasecurity.com there is a dpkg -l on the site.
-J- :P
Similar Threads
-
By fatso in forum General Support
Replies: 6
Last Post: 03-18-2006, 10:00 PM
-
By yuhnstuff in forum General Support
Replies: 2
Last Post: 11-10-2003, 01:18 PM
-
By TyphoonMentat in forum Customising & Remastering
Replies: 0
Last Post: 11-02-2003, 09:24 AM
-
By arbs22 in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 10-17-2003, 04:39 AM
-
By Leg0z in forum Customising & Remastering
Replies: 6
Last Post: 05-22-2003, 10:32 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Dell 6P85J 4TB ST4000NM0063 7.2k 6Gb/s 3.5” SAS SED Hard Drive with Tray
$39.99

Western Digital HUS726T4TAL5204 4TB 7.2K SAS 12Gb/s 3.5" 512e HDD NetApp X375A
$64.00

HGST Ultrastar HUS726040AL5210 4TB 7200RPM SAS 12Gb/s Enterprise HDD
$41.00

DELL 2TB Enterprise HDD (7200RPM, 3.5", SATA III, 128MB Cache) HUS722T2TALA600
$49.95

Seagate Exos ST2000NX0253 HDD 2TB SATA 7.2K 2.5" 512b/s
$55.00

Dell ST6000NM0034 1HT27Z-150 NWCCG 6TB SAS 3.5 7.2K ENTERPRISE SERVER DRIVE
$68.99

Toshiba 14TB MG07 MG07ACA14TEY 7.2K RPM SATA 6Gb/s 512e 3.5" Enterprise HDD
$339.00

Lot of 2 HP 4TB / 128MB SATA 7.2K RPM 3.5" Hard Drive MB4000GCWDC /ST4000NM0033
$125.00

Toshiba DT01ACA100 1 TB 3.5" SATA III 3.5 in Desktop Hard Drive
$24.99

New Western Digital WD40EFPX 68C6CN0 4TB 3.5" SATA III Internal NAS Red Plus HDD
$137.59