I encountered an error while making the KNOPPIX compressed filesystem from mkisofs. I googled for the answer to why this error was appearing:
end request: I/O error, dev 02:00 (floppy, sector 0)
No one had an answer.
Well, for archival purposes this is what is happening.
At some point you had chrooted to the source, mounted /proc
and did a ^D exit without umount /proc . It left a link in /mnt/floppy
to /mnt/auto/floppy
In the KNOPPIX main system environment there is an auto mounting
reference to the floppy in /etc/fstab , so when you are compressing the source, it hits the floppy drive mount, finds no floppy in your system and produces an error.
The solution: Remove the link to /mnt/auto/floppy in the source area of your KNOPPIX project. I'm not sure if there was a file there before but I suspect it was probably just a directory /mnt/floppy under source.
I removed mine and reran mkisofs without the error appearing again.
In the future, always umount /proc before hitting that ^D ...

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00
Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD
$119.99
Dell PowerEdge M640 Blade Barebone Server Dell P/N: HHB006 Tested Working
$149.99
NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 4 NODE SERVER
$1499.97
Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 2.8ghz 20-Cores | 128GB
$149.99
Dell Poweredge C6400 24x 2.5’’ 2x 2400W 4x C6420 Nodes H330 | 2x SFP | 8x Trays
$799.99
LOT (8) Cisco UCS UCSB-B200-M5 2x6248R 24 core 3.0G 24x64g DDR4-2933 ram
$112000.00
Cisco B200 M3 2x E5-2670V2 10 Core 8x 16GB-128GB Ram Blade Server VIC1240 14900R
$399.00
Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR
$96.60
Dell Poweredge VRTX 25Bay 2.5" 2x PERC 8, 2xCMC, I/O 1GB Pass Through, 4x PS
$578.08