graphics card problems (two different machines)

[beefthief]

On my older pc I have a ati radeon 7000 VE
that knoppix defaults to using the vesa server for
I know there is a linux driver for this card
(Lycoris boots up fine and configures this card)
is there anything I can do to get the driver for this
card included the next release?

also i'm having trouble getting X started on
my new computer that has a integrated
ProSavageDDR K4M266
on this one knoppix tries using the savage
server when X comes up
it displays a screen telling
me to 'check the display settings'
and thats as far as it goes

the faq says to send the lspci and lspci -n
information dump in by email
but doesn't give a address to send it too

[rickenbacherus]

On my older pc I have a ati radeon 7000 VE
that knoppix defaults to using the vesa server for
I know there is a linux driver for this card
(Lycoris boots up fine and configures this card)
is there anything I can do to get the driver for this
card included the next release?

boot: knoppix lang=us xmodule=ati

also i'm having trouble getting X started on
my new computer that has a integrated
ProSavageDDR K4M266
on this one knoppix tries using the savage
server when X comes up
it displays a screen telling
me to 'check the display settings'
and thats as far as it goes

Not sure about this one if the Savage server doesn't work. Of course there are other parameters. Check out the cheat codes

the faq says to send the lspci and lspci -n
information dump in by email
but doesn't give a address to send it too

Not email but 'post'. Post it here.

edit You could always have a look at your Lycoris configuration and use it with Knoppix. Boot expert and configure the xserver yourself. If you install Knoppix to hdd you could just copy the file over with a few minor changes.

[beefthief]

heres the lspci output for my hewlett packard 304w:

00:00.0 Host bridge: VIA Technologies, Inc. VT8375 [KM266] Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
00:0a.0 Communication controller: Lucent Microelectronics LT WinModem (rev 02)
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio Controller (rev 50)
01:00.0 VGA compatible controller: S3 Inc. [ProSavageDDR K4M266]

heres the lspci -n:

00:00.0 Class 0600: 1106:3116
00:01.0 Class 0604: 1106:b091
00:0a.0 Class 0780: 11c1:044e (rev 02)
00:0b.0 Class 0200: 10ec:8139 (rev 10)
00:10.0 Class 0c03: 1106:3038 (rev 80)
00:10.1 Class 0c03: 1106:3038 (rev 80)
00:10.2 Class 0c03: 1106:3038 (rev 80)
00:10.3 Class 0c03: 1106:3104 (rev 82)
00:11.0 Class 0601: 1106:3177
00:11.1 Class 0101: 1106:0571 (rev 06)
00:11.5 Class 0401: 1106:3059 (rev 50)
01:00.0 Class 0300: 5333:8d04

heres the output for my older pc:

00:00.0 Host bridge: Intel Corp. 430TX - 82439TX MTXC (rev 01)
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 01)
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 01)
00:0a.0 Ethernet controller: Linksys Network Everywhere Fast Ethernet 10/100 model NC100 (rev 11)
00:0b.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
00:0c.0 USB Controller: VIA Technologies, Inc. USB (rev 50)
00:0c.1 USB Controller: VIA Technologies, Inc. USB (rev 50)
00:0c.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)

and the lspci -n:

00:00.0 Class 0600: 8086:7100 (rev 01)
00:07.0 Class 0601: 8086:7110 (rev 01)
00:07.1 Class 0101: 8086:7111 (rev 01)
00:07.2 Class 0c03: 8086:7112 (rev 01)
00:07.3 Class 0680: 8086:7113 (rev 01)
00:0a.0 Class 0200: 1317:0985 (rev 11)
00:0b.0 Class 0300: 1002:5159
00:0c.0 Class 0c03: 1106:3038 (rev 50)
00:0c.1 Class 0c03: 1106:3038 (rev 50)
00:0c.2 Class 0c03: 1106:3104 (rev 51)