-
Junior Member
registered user
Subject : Konferenz DVD 2003
Was able to buy the Linuxtag 2003 DVD from Lehmanns- Berlin. At first sight : nice piece of work!
However was not able to use the DVD just as a Knoppic CD. The DVD boots and everything is normal till the opening screen (in KDE) with ao all the info about the DVD. After a few seconds the screen freezes : keyboard and mouse do't react. The only thing to do is to reset or to shut down. Same problem under Fluxbox : after a few seconds (trying to load Kshisen) I had to shutdown.
Should I blame the DVD-disk or my DVD/CDROM drive?
Thanks beforehand for any help.
Regards,
Georges.
-
Senior Member
registered user
-
Junior Member
registered user
Knoppix 3.2 DVD
Thanks for good advice.
After 'Knoppix testcd" got :
"Reading files and checking against KNOPPIX?md5sums, this may take a while"
Waited for over three quarters of an hour. Still checking ... Then I shut the computer down. Is this normal on a Intel P4 2.40 Mhz with 512 MB Ram machine?
However does this prove anything?
Thanks for any comment.
Regards,
Georges.
-
Senior Member
registered user
Not good- it should have returned after 10, maybe 15 minutes on the outside with "everything looks ok" Looks like maybe your cd's no good. The only other thing I can think of is booting it on another machine. Probably not what you wanted to hear eh?
-
Junior Member
registered user
Thanks for kind reaction.
My problem is half solved ... Discovered by accident that everything goes fine if I remove an USb 2.0 memory stick. I can boot and use the DVD as a CD then. Same problem with Knoppix 2003-07-24.
With Knoppic 2003-06-06 everything went fine with that USb 2.0 memory stick. The trouble is now that I lose my /home-dir and my configuration when using the DVD or the Knoppix 2003-07-24.
Any idea?
Thank you.
Best Regards,
Georges.
-
Junior Member
registered user
Could you perhaps consider putting up an image of the DVD somewhere online? If you would I could probably make the effort to start up a bittorrent server--we'd need some more seeds (err?) as I only have a 256k upstream (i.e. ~40hr download for the DVD for one person) but it'd be a start.
Or maybe someone with more bandwidth would help and host it.
-
I would be willing to dedicate some bandwidth to the project. If someone who has the image, contact me at
dshurett (at) alphaomegahosting (dot) com
Similar Threads
-
By Harry Kuhman in forum General Support
Replies: 11
Last Post: 02-03-2012, 05:28 PM
-
By GaTk in forum Hardware & Booting
Replies: 0
Last Post: 10-27-2004, 01:31 PM
-
By sn0wflake in forum Ideas
Replies: 0
Last Post: 12-01-2003, 04:14 PM
-
By kx14386 in forum Laptops
Replies: 5
Last Post: 09-07-2003, 10:47 AM
-
By jedovaty in forum Hardware & Booting
Replies: 2
Last Post: 06-12-2003, 06:36 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Juniper EX2300 12-Port Gigabit PoE+ Managed Network Switch P/N: EX2300-C-12P
$149.99

Juniper QFX5100-48S Switch 48x SFP+ 6x QSFP Ports w/ 30x SFP modules 1*DC PSU
$151.80

Juniper Networks AP33 Wireless Access Point Bluetooth WiFi 6 Cloud Managed NIB
$54.99

Juniper QFX10002-36Q 36-Port 40GbE QSFP+ 24x 100G Ethernet Switch
$649.99

Juniper EX4100-F-12P Switch 12x 1GbE PoE 2x 10GbE Uplinks 4x 10GbE Stack Ports
$900.00

NEW JUNIPER QFX5120-48Y-AFO-T 48x 10/25GbE SFP28 8x 40/100GbE Switch Dual AC PS
$9500.00

Juniper EX2300-C 12 Port Compact Gigabit Switch EX2300-C-12p
$99.99

Juniper EX2300-C-12P 12 Port Gigabit PoE+ 2x10G SFP+ Managed Compact Switch
$179.99

Juniper Networks EX2300-48P 48-Port Gigabit PoE Managed Ethernet Switch
$79.99

Juniper QFX5100-48T-AFO 48-port 1G/10G RJ-45 ports 6 QSFP ports
$669.99