Results 1 to 6 of 6

Thread: I have a problem with my Knoppix!

  1. #1
    Junior Member
    Join Date
    Aug 2003
    Location
    Bucharest
    Posts
    3

    I have a problem with my Knoppix!

    Hi guys!
    My problem said, when boot Knoppix my Knoppix said kernel is confused with root.
    What is the problem?
    Thx!

  2. #2
    Senior Member registered user
    Join Date
    Nov 2002
    Posts
    1,353

    Re: I have a problem with my Knoppix!

    Quote Originally Posted by request
    Hi guys!
    My problem said, when boot Knoppix my Knoppix said kernel is confused with root.
    What is the problem?
    Thx!
    Hi,

    I moved your post out of the Tips and Tricks forum, because it really doesn't fit too well there.

    We may need a little more info on your problem.

    What exactly is your error message? Are there any other error messages you see? Kernel error messages can often occur becuase you have a bad cd image, or if your hardware is proving problematic.

    To test for a bad cd, use the "testcd" cheat code when you boot up.

    You can also use the "failsafe" cheatcode to use minimal hardware detection: that way you can see if something (usb, scsi, pci, etc ) is causing you problems.

  3. #3
    Junior Member
    Join Date
    Aug 2003
    Location
    Bucharest
    Posts
    3

    Hello!

    My HDD space is 20 GB Maxtor and I have bug on my hard disk, now space available is 19.40 GB.
    I boot my Knoppix 3.2 with kernel "expert".
    And this see my hardware (all) and two partition FAT.
    My Knoppix said:
    "FAT bad errors size=0
    FAT bad errops size=0
    Kernel panic: VFS: ....root erorrs.... 01:01"
    Theat said my Knoppix! THX.

  4. #4
    Senior Member registered user
    Join Date
    Nov 2002
    Posts
    1,353
    Hmm. Hard drive problems shouldn't be an issue when running Knoppix from the cd, unless Knoppix is trying to use swap space off of your hard drive where there are bad sectors. I'm not sure what else would be causing this problem.

  5. #5
    Junior Member
    Join Date
    Jul 2003
    Location
    Minneapolis, MN
    Posts
    3
    I think that in order to be effective at answering your question we need to know specifically what your setup is, what your error message is, and what you'r trying to do. If you can give us more information we might can help you.

  6. #6
    Junior Member
    Join Date
    Aug 2003
    Location
    Bucharest
    Posts
    3
    Other answer to my Knoppix 3.2:

    Initrid extend Beyound end of Memory (0x06ff3a32>0x06ff0000)
    ................................................
    Kernel panic: VFS: unable to mount root fs on 01:01 (this answer my knoppix)

    My Computer Hardware:
    CPU AMD 850 Mhz Ram Dimm 128 Motherboard EagleTec
    video onboard sunet onboard CD-rom LG 52x
    HDD 20 GB Maxtor now 19.40 Gb. 2 partition First 25% to space HDD partition primary with WIN98SE and second partition with 75% to space HDD with partition Logical.
    I think that is enough information. no?

Similar Threads

  1. Problem with Knoppix 3,4
    By fushigi in forum Hdd Install / Debian / Apt
    Replies: 1
    Last Post: 04-06-2004, 03:38 AM
  2. Problem with K3b in Knoppix
    By jhn in forum General Support
    Replies: 3
    Last Post: 01-28-2004, 09:12 AM
  3. Problem with HD and Knoppix 3.3 HELP
    By andymadigan in forum Hdd Install / Debian / Apt
    Replies: 2
    Last Post: 12-26-2003, 03:43 AM
  4. Knoppix problem
    By the_halfling in forum General Support
    Replies: 4
    Last Post: 11-25-2003, 03:32 AM
  5. Problem Unique to Knoppix Later Versions!(SIS problem!)
    By bongski55 in forum Hardware & Booting
    Replies: 4
    Last Post: 11-15-2003, 10:19 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


TP-Link TL-SG105 5-Port Gigabit Ethernet Unmanaged Metal Desktop Network Switch picture

TP-Link TL-SG105 5-Port Gigabit Ethernet Unmanaged Metal Desktop Network Switch

$19.99



Cisco Catalyst 2960-48TT-L 48-Port Fast Ethernet Managed Rackmount Switch picture

Cisco Catalyst 2960-48TT-L 48-Port Fast Ethernet Managed Rackmount Switch

$46.99



TP-Link TL-SG1048 48-Port Gigabit Rackmount Switch New Factory Sealed picture

TP-Link TL-SG1048 48-Port Gigabit Rackmount Switch New Factory Sealed

$199.99



NETGEAR GS308EP Essential Series 8-Port Gigabit PoE+ Unmanaged Switch picture

NETGEAR GS308EP Essential Series 8-Port Gigabit PoE+ Unmanaged Switch

$49.99



10-Port Gigabit PoE Network Switch with 8 PoE+ Ports with 2 Combo SFP Slots 125W picture

10-Port Gigabit PoE Network Switch with 8 PoE+ Ports with 2 Combo SFP Slots 125W

$39.99



5 Port Gigabit Unmanaged Ethernet Switch, Home Network Hub, Office Ethernet S... picture

5 Port Gigabit Unmanaged Ethernet Switch, Home Network Hub, Office Ethernet S...

$9.64



TP-Link TL-SG2210P 10-Port Gigabit Smart Switch w/ 8-Port PoE+ NO AC SKU 25597 picture

TP-Link TL-SG2210P 10-Port Gigabit Smart Switch w/ 8-Port PoE+ NO AC SKU 25597

$36.98



Arista DCS-7010T-48-R 48P 1GbE 4P 10GbE SFP+ RA Switch with rack mounts picture

Arista DCS-7010T-48-R 48P 1GbE 4P 10GbE SFP+ RA Switch with rack mounts

$69.00



Linksys LGS328MPC 24-Port Managed Gigabit PoE+ Switch with 4 10G SFP+ Uplinks picture

Linksys LGS328MPC 24-Port Managed Gigabit PoE+ Switch with 4 10G SFP+ Uplinks

$224.95



Cisco WS-C3650-12X48UR-L 48-Port Stackable Layer 3 8x10G SFP+ Port Switch picture

Cisco WS-C3650-12X48UR-L 48-Port Stackable Layer 3 8x10G SFP+ Port Switch

$129.99