-
I have a problem with my Knoppix!
Hi guys!
My problem said, when boot Knoppix my Knoppix said kernel is confused with root.
What is the problem?
Thx!
-
Senior Member
registered user
Re: I have a problem with my Knoppix!

Originally Posted by
request
Hi guys!
My problem said, when boot Knoppix my Knoppix said kernel is confused with root.
What is the problem?
Thx!

Hi,
I moved your post out of the Tips and Tricks forum, because it really doesn't fit too well there.
We may need a little more info on your problem.
What exactly is your error message? Are there any other error messages you see? Kernel error messages can often occur becuase you have a bad cd image, or if your hardware is proving problematic.
To test for a bad cd, use the "testcd" cheat code when you boot up.
You can also use the "failsafe" cheatcode to use minimal hardware detection: that way you can see if something (usb, scsi, pci, etc ) is causing you problems.
-
Hello!
My HDD space is 20 GB Maxtor and I have bug on my hard disk, now space available is 19.40 GB.
I boot my Knoppix 3.2 with kernel "expert".
And this see my hardware (all) and two partition FAT.
My Knoppix said:
"FAT bad errors size=0
FAT bad errops size=0
Kernel panic: VFS: ....root erorrs.... 01:01"
Theat said my Knoppix! THX.
-
Senior Member
registered user
Hmm. Hard drive problems shouldn't be an issue when running Knoppix from the cd, unless Knoppix is trying to use swap space off of your hard drive where there are bad sectors. I'm not sure what else would be causing this problem.
-
I think that in order to be effective at answering your question we need to know specifically what your setup is, what your error message is, and what you'r trying to do. If you can give us more information we might can help you.
-
Other answer to my Knoppix 3.2:
Initrid extend Beyound end of Memory (0x06ff3a32>0x06ff0000)
................................................
Kernel panic: VFS: unable to mount root fs on 01:01 (this answer my knoppix)
My Computer Hardware:
CPU AMD 850 Mhz Ram Dimm 128 Motherboard EagleTec
video onboard sunet onboard CD-rom LG 52x
HDD 20 GB Maxtor now 19.40 Gb. 2 partition First 25% to space HDD partition primary with WIN98SE and second partition with 75% to space HDD with partition Logical.
I think that is enough information. no?
Similar Threads
-
By fushigi in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 04-06-2004, 03:38 AM
-
By jhn in forum General Support
Replies: 3
Last Post: 01-28-2004, 09:12 AM
-
By andymadigan in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 12-26-2003, 03:43 AM
-
By the_halfling in forum General Support
Replies: 4
Last Post: 11-25-2003, 03:32 AM
-
By bongski55 in forum Hardware & Booting
Replies: 4
Last Post: 11-15-2003, 10:19 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$378.93

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb
$374.99

Dell PowerEdge R240 Intel Xeon E-2224 3.50GHz 8GB DDR4 ECC NO HDD 250W
$285.97

Dell Poweredge R810 4x Xeon X7560 2.26ghz 32-Cores | 256GB | 3x Trays | H700
$289.99

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD
$149.99

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W
$409.99

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2690 v3 | 64gb Ram | 2x 1600W
$524.99

Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD
$99.99

Dell PowerEdge R730 Server 2x Xeon E5-2630 V4 64GB DDR4 2TB HDD Rackmount
$489.99