-
Kernel panic - reiserfs
I recompiled kernel 2.4.21-xfs to include raid0 and md modules, I installed lilo, after reboot I obtain this error:
/modules/reiserfs.o: kernel module version mismatch
/modules/reiserfs.o was compiled for kernel version 2.4.21-xfs
while this kernel is version 2.4.21
FAT: bogous logical sector size 0
FAT: bogous logical sector size 0
md: swapper(pid 1) used obsolete MD ioctl, upgrade your software to use new ictls
kernel panic: VFS: Unable to mount root fs on 09:00
The system has 2 hard disks with 3 partitions with raid 0 fs:reiserfs, swap partitions and a ext3 /boot non-raid partition
I recompiled source of knoppix 2.4.21-xfs kernel not 2.4.21 vanilla version, then I don't understand the error.
Please help me to boot the system.
Thanks.
-
Junior Member
registered user
Hi,
did you run "make modules modules_install" from /usr/src/linux after kernel compilation ?
I would compile the reiserfs and ext3 support directly into the kernel (or at least the filesystem used for the root-fs). Otherwise you'd need to have an initial ram-disk (initrd).
good luck
-
I compiled the kernel with the live-cd mounting the root partition in /mnt/root/
My banal doubt is:
How run "modules install" in this root directory tree mounted under /mnt/root ?
-
Senior Member
registered user
I had the same problem before and the reason was that reiser file system was compiled as a module. Try to modify your new kernel config by putting a 'y' to lines containing 'reiser'in the file system section of the config file. then do another kernel compile.
-
Ok, done.
But how can I run "make modules_install" if my /dev/md0 (raid0 reiserfs) - the root filesystem on hard disk where I compiled the kernel - is mounted under /mnt/root of live-cd fs?
I tried to chroot to /mnt/root but many commands doesn't run, maybe because environment paths still reamain the same of live cd.
Similar Threads
-
By Trace Green in forum Customising & Remastering
Replies: 2
Last Post: 05-19-2005, 04:33 PM
-
By gitarzysta in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 06-03-2004, 08:36 PM
-
By cYmen in forum Customising & Remastering
Replies: 0
Last Post: 07-14-2003, 10:17 AM
-
By tji in forum Customising & Remastering
Replies: 4
Last Post: 06-12-2003, 06:40 PM
-
By mordor in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 03-26-2003, 03:40 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

HP ProLiant MicroServer Gen8 G1610T @2.3 GHz, 16GB, 712317-001 NO HDD/OS
$199.00

Supermicro 505-2 Server
$280.00

Supermicro CSE-937 3U Storage Chassis No CPU No HDD No Ram Tested & Reset
$129.99

Supermicro 1U Network Server Appliance 16GB RAM 800GB SSD 6 LAN Ports Powers On
$450.00

HP PROLIANT TPS-W003 MICRO- SERVER TOWER Gen 8, 16G RAM
$195.00

Supermicro 2U X10DRU-i 2x E5-2680 v3 2.5ghz 32gb Ram 240gb SSD 2x GPU *READ*
$369.99

SUPERMICRO CSE-836 XEON E5-1620 v3 @ 3.50GHz, 32GB RAM, NO HDD/OS
$299.99

Supermicro 1027GR-TSF 1U Rackmount Server 2x Xeon 2.3GHz 128GB DDR3
$219.99

Supermicro CSE-216 No CPU No Ram No HDD Tested & Reset
$149.99

Nasuni NF-50 Supermicro Server, Atom CPU C2558, @ 2.40GHz, 8GB RAM-No HDD/OS/AC
$187.50