Results 1 to 5 of 5

Thread: Kernel panic - reiserfs

  1. #1
    Junior Member
    Join Date
    Aug 2003
    Posts
    3

    Kernel panic - reiserfs

    I recompiled kernel 2.4.21-xfs to include raid0 and md modules, I installed lilo, after reboot I obtain this error:

    /modules/reiserfs.o: kernel module version mismatch
    /modules/reiserfs.o was compiled for kernel version 2.4.21-xfs
    while this kernel is version 2.4.21
    FAT: bogous logical sector size 0
    FAT: bogous logical sector size 0
    md: swapper(pid 1) used obsolete MD ioctl, upgrade your software to use new ictls
    kernel panic: VFS: Unable to mount root fs on 09:00

    The system has 2 hard disks with 3 partitions with raid 0 fs:reiserfs, swap partitions and a ext3 /boot non-raid partition
    I recompiled source of knoppix 2.4.21-xfs kernel not 2.4.21 vanilla version, then I don't understand the error.

    Please help me to boot the system.

    Thanks.

  2. #2
    Junior Member registered user
    Join Date
    Feb 2003
    Posts
    14
    Hi,
    did you run "make modules modules_install" from /usr/src/linux after kernel compilation ?
    I would compile the reiserfs and ext3 support directly into the kernel (or at least the filesystem used for the root-fs). Otherwise you'd need to have an initial ram-disk (initrd).

    good luck

  3. #3
    Junior Member
    Join Date
    Aug 2003
    Posts
    3
    I compiled the kernel with the live-cd mounting the root partition in /mnt/root/

    My banal doubt is:
    How run "modules install" in this root directory tree mounted under /mnt/root ?

  4. #4
    Senior Member registered user
    Join Date
    Apr 2003
    Location
    Muscat.Oman
    Posts
    262
    I had the same problem before and the reason was that reiser file system was compiled as a module. Try to modify your new kernel config by putting a 'y' to lines containing 'reiser'in the file system section of the config file. then do another kernel compile.

  5. #5
    Junior Member
    Join Date
    Aug 2003
    Posts
    3
    Ok, done.

    But how can I run "make modules_install" if my /dev/md0 (raid0 reiserfs) - the root filesystem on hard disk where I compiled the kernel - is mounted under /mnt/root of live-cd fs?

    I tried to chroot to /mnt/root but many commands doesn't run, maybe because environment paths still reamain the same of live cd.

Similar Threads

  1. remaster kernel--Kernel Panic: VFS......
    By Trace Green in forum Customising & Remastering
    Replies: 2
    Last Post: 05-19-2005, 04:33 PM
  2. Errors and kernel panic during boot (2.6 Kernel)
    By gitarzysta in forum Hdd Install / Debian / Apt
    Replies: 1
    Last Post: 06-03-2004, 08:36 PM
  3. kernel panic with custom kernel
    By cYmen in forum Customising & Remastering
    Replies: 0
    Last Post: 07-14-2003, 10:17 AM
  4. Modified kernel results in Kernel Panic - No init found.
    By tji in forum Customising & Remastering
    Replies: 4
    Last Post: 06-12-2003, 06:40 PM
  5. Reiserfs and kernel compilation
    By mordor in forum Hdd Install / Debian / Apt
    Replies: 3
    Last Post: 03-26-2003, 03:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR picture

Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR

$95.20



Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 256GB DDR3 RAM NO HDD picture

Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 256GB DDR3 RAM NO HDD

$349.99



NEW Cisco UCSB-5108-AC2 Blade Server Chassis 8 Slot 6RU Chassis 4 X PSU - DW picture

NEW Cisco UCSB-5108-AC2 Blade Server Chassis 8 Slot 6RU Chassis 4 X PSU - DW

$599.40



Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric picture

Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric

$174.99



Supermicro 4U 32x 3.5 Bays 4-Nodes | 8x E5-2660 v3 2.6Ghz | 64gb RAM | 9207-8i picture

Supermicro 4U 32x 3.5 Bays 4-Nodes | 8x E5-2660 v3 2.6Ghz | 64gb RAM | 9207-8i

$699.99



NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 4 NODE SERVER picture

NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 4 NODE SERVER

$1499.97



Dell PowerEdge VRTX 2.5

Dell PowerEdge VRTX 2.5"x25 Bay Blade Enclosure 4x1600W + 4X M640 (4X Blades)

$1599.99



Dell Poweredge C6400 24x 2.5’’ 2x 2400W 4x C6420 Nodes H330 | 2x SFP | 8x Trays picture

Dell Poweredge C6400 24x 2.5’’ 2x 2400W 4x C6420 Nodes H330 | 2x SFP | 8x Trays

$799.99



Supermicro 938-16 16-LFF MicroCloud SuperServer 5038MR-H8TRF *No Blade Servers* picture

Supermicro 938-16 16-LFF MicroCloud SuperServer 5038MR-H8TRF *No Blade Servers*

$159.99



Dell PowerEdge M640 Blade Barebone Server Dell P/N: HHB006 Tested Working picture

Dell PowerEdge M640 Blade Barebone Server Dell P/N: HHB006 Tested Working

$149.99