Teac R55S SCSI wird nicht erkannt

[hal50]

Hallo Gemeinde,

ich habe Knoppix 3.3 installiert und alles läuft soweit gut.
Ich habe insgesamt 5 (fünf) CD Laufwerke!!

1 DVD-ROM und 1 DVD-Writer sind am IDE-Anschluss

Am SCSI Controller Symbios Logic 53C810 ist angeschlossen:
ID 1: Yamaha CD-Brenner CRW-F1S
ID 2: Yamaha CD-Brenner CRW-2100S
ID 3: TEAC R55S
ID 4: Scanner Avison 630CS
ID 5: leer
ID 6: HP C1533 A Streamer

ein "cdrecord -scanbus" liefert mir

scsibus0:
0,0,0 0) 'MATSHITA' 'LS-120 VER5 00' 'F515' Removable Disk
0,1,0 1) '_NEC ' 'DVD_RW ND-1300A ' '1.07' Removable CD-ROM
0,2,0 2) '_NEC ' 'DVD-ROM DV-5700A' '3.43' Removable CD-ROM
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
scsibus1:
1,0,0 100) *
1,1,0 101) 'YAMAHA ' 'CRW-F1S ' '1.0g' Removable CD-ROM
1,2,0 102) 'YAMAHA ' 'CRW2100S ' '1.0N' Removable CD-ROM
1,3,0 103) 'TEAC ' 'CD-R55S ' '1.0R' Removable CD-ROM
1,4,0 104) 'AVISION ' 'AV630CS ' '1.20' Scanner
1,5,0 105) *
1,6,0 106) 'HP ' 'C1533A ' '9608' Removable Tape
1,7,0 107) *
scsibus2:
2,0,0 200) 'Y-E DATA' 'USB-FDU ' '4.01' Removable Disk
2,1,0 201) *
2,2,0 202) *
2,3,0 203) *
2,4,0 204) *
2,5,0 205) *
2,6,0 206) *
2,7,0 207) *

Das TEAC Laufwerk wird zwar erkannt, aber ich kann nicht auf das Laufwerk zugreifen.
Auch K3b erkennt das Laufwerk nicht!!!
Nur wenn ich die beiden Yamaha Laufwerke NICHT anschließe, wird das TEAC Laufwerk korrekt auf ID3 erkannt.

Meine fstab sieht so aus:

v# /etc/fstab: filesystem table.
#
# filesystem mountpoint type options dump pass
/dev/hda11 / reiserfs defaults 0 1
/dev/hda12 none swap sw 0 0
proc /proc proc defaults 0 0
/dev/fd0 /floppy vfat defaults,user,noauto,showexec,umask=022 0 0
#
/dev/cdrom /cdrom iso9660 defaults,ro,user,noexec,noauto 0 0
/dev/cdrom1 /cdrom1 iso9660 defaults,ro,user,noexec,noauto 0 0
/dev/dvd /dvd iso9660 defaults,ro,user,noexec,noauto 0 0
/dev/cdaudio /cdaudio iso9660 defaults,ro,user,noexec,noauto 0 0
#
# Added by KNOPPIX
/dev/hda1 /mnt/hda1 reiserfs noauto,users,exec 0 0
# Added by KNOPPIX
/dev/hda2 /mnt/hda2 vfat noauto,users,exec,umask=000 0 0
# Added by KNOPPIX
/dev/hda3 /mnt/hda3 vfat noauto,users,exec,umask=000 0 0
# Added by KNOPPIX
/dev/hda5 /mnt/hda5 vfat noauto,users,exec,umask=000 0 0
# Added by KNOPPIX
/dev/hda6 /mnt/hda6 vfat noauto,users,exec,umask=000 0 0
# Added by KNOPPIX
/dev/hda7 /mnt/hda7 vfat noauto,users,exec,umask=000 0 0
# Added by KNOPPIX
/dev/hda8 /mnt/hda8 vfat noauto,users,exec,umask=000 0 0
# Added by KNOPPIX
/dev/hda9 /mnt/hda9 vfat noauto,users,exec,umask=000 0 0
# Added by KNOPPIX
/dev/hda10 /mnt/hda10 auto noauto,users,exec 0 0
# Added by KNOPPIX
/dev/hda13 /mnt/hda13 auto noauto,users,exec 0 0
# Added by KNOPPIX
/dev/hda14 /mnt/hda14 auto noauto,users,exec 0 0
# Added by KNOPPIX
/dev/hda15 /mnt/hda15 auto noauto,users,exec 0 0
# Added by KNOPPIX
/dev/sda /mnt/sda auto noauto,users,exec 0 0
# Added by KNOPPIX
/dev/hdb /mnt/hdb auto noauto,users,exec 0 0
#
/dev/scd2 /cdwriter1 auto ro,noauto,user,exec 0 0
/dev/scd3 /cdwriter2 auto ro,noauto,user,exec 0 0
/dev/scd4 /cdwriter3 auto ro,noauto,user,exec 0 0


Wobei ich den letzten Eintrag selber per Hand eingefügt habe. Ein /cdwriter3 Verzeichnis existiert auch.

Wer kann helfen???

Robert

[paradocs]

Hallo hal50,

Vielleicht können Sie dies versuchen:
sudo rebuildfstab -r

Haben Sie gewußt, daß es deutsches KNOPPIX Forum gibt?
Sie können auch dort aufstellen.
http://www.linuxtag.org/cgi-bin/yabb/YaBB.pl

Auch:
IRC /join #knoppix

Grüße
paradocs

[hal50]

Thank you for your answer. I didn't know about the german forum.
I am a newbie in Linux and these are my first steps with Knoppix.

So, I tried what you recommended but I have still the same problem!

Robert

[Stephen]

Thank you for your answer. I didn't know about the german forum.
I am a newbie in Linux and these are my first steps with Knoppix.

So, I tried what you recommended but I have still the same problem!

Robert

Well how about a translation of the question to English and maybe someone else can help you. I take it has something to do with k3b and your burners have you tried cdrecord from the command line?

[paradocs]

Howdy hal50,

Well, your English is a darn site better than my German.

Please restate you question in English.

I do all of my CDR, CDRW, (hopefully a DVD-R is in my near future)
with mkisofs and cdrecord.

For your TIAC make an iso with mkiosfs,
for example /home/knoppix/My.iso
cdrecord -v speed=4 dev=1,3,0 -data /home/knoppix/My.ios
to blank a CDRW
cdrecord -v speed=4 dev=1,3,0 blank=fast

I do not know if it will help but look at the file
cat /etc/default/cdrecord

Best Wishes,
paradocs