Also, xmms will hang anyway.
I am using the latest version of Knoppix CD.
I boot from the CD with cheat code alsa. Info Center of KDE shows :-
Sound Driver:3.8.1a-980706 (ALSA v0.9.2 emulation code)
Kernel: Linux Knoppix 2.2.21-xfs #1 Fre Jul 25 00:06:47 CEST 2003 i686
Config options: 0
Installed drivers:
Type 10: ALSA emulation
Card config:
Intel 82801DB-ICH4 at 0xe0100c00, irq 9
Audio devices:
0: Intel 82801DB-ICH4 (DUPLEX)
Synth devices: NOT ENABLED IN CONFIG
Midi devices: NOT ENABLED IN CONFIG
Timers:
7: system timer
Mixers:
0: Analog Devices id 74
But I cannot hear the sound from my computer. So, I set the "Sound & Multimedia" in KDE Control Center. Sound system -> aRTs -> enabled "Start aRts soundserver on KDE starup". Then, Sound I/O -> selected "Advanced Linux Sound Architecture" at Sound I/O method. Enable full duplex operation. Set 48000 at sampling rate. When I save the setting, I get the following error message :
Error while initializing the sound driver:
device: default can't be opened for playback (Device or resource busy)
The sound server will continue, using the null output device.
How can I solve this problem? Thanks.
Also, xmms will hang anyway.

Dell 6P85J 4TB ST4000NM0063 7.2k 6Gb/s 3.5” SAS SED Hard Drive with Tray
$39.99
Western Digital HUS726T4TAL5204 4TB 7.2K SAS 12Gb/s 3.5" 512e HDD NetApp X375A
$64.00
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$318.99
DELL 2TB Enterprise HDD (7200RPM, 3.5", SATA III, 128MB Cache) HUS722T2TALA600
$49.95
Seagate ST4000NM0034 Enterprise 4TB 7200RPM SAS 12Gb/s HDD v4
$39.00
Seagate ST500DM009 BarraCuda 500 GB 3.5" SATA III Desktop Hard Drive
$14.99
Dell ST6000NM0034 1HT27Z-150 NWCCG 6TB SAS 3.5 7.2K ENTERPRISE SERVER DRIVE
$68.99
HGST HUS724040ALA640 HDD 4TB SATA 6Gb/s 7.5K 3.5" 0F19459 512 b/s
$78.00
Seagate BarraCuda 28TB 7.2K SATA 6Gb/s 3.5in Internal HDD ST28000DM000 - Tested
$670.00
Seagate ST8000NM0075 Enterprise Capacity 3.5 HDD 8TB SAS Hard Drive 8TB EXOS
$184.99