Hi,

I'm sorry to say that I have no solution so far, but what I can tell you is that: I have a DELL PC with the same scsi controller and I also get these error messages BUT nevertheless the kernel is finally able to boot. Here is a piece of my dmesg:

mptbase: Initiating ioc0 recovery
mptbase: ioc0: WARNING - IOC is in FAULT state!!!
FAULT code = 000eh
mptbase: ioc0: ERROR - Doorbell ACK timeout(40)!
mptbase: ioc0: Recovered from IOC FAULT
mptbase: Initiating ioc0 recovery

These messages occur about 4 times and then everthing just moves on as if the problem would not exist. A collegue of mine has the exact same PC (actually the PC's were ordered and shipped together so that they should definitely be the same in every detail) and he does not have this problem. We had a look at every BIOS revision of the board and the scsi controller but just everything is identical. I keep you posted as soon as I am aware of what's going on.

Wolfgang

Quote Originally Posted by niamor
I get an error when launching knoppix 3.2 on a dell computer with a LSI scsi card :
* mptbase : ioc0 error : DoorBell ACK Timeout *
and then knoppix don't see my hd.

I have three of these Dell computers, same problem with the 3 one's.

Modules mptbase and mptscsi are supposed to be okay with kernels > 2.4.18 , and knoppix's one is 2.4.22...

thanks for your help!