How to install a USB Digital Camera?

[tweety77]

I´m trying to install / use my USB - Digital Camera (CASIO QV-R4) Camera under KNOPPIX 3.3.

I tried to do this in KDE Control Center - but it didn´t support my camera.

Has anybody any experience?

thank you,
stefan

[Tech2k]

I just bought a usb 6-n-1 card reader for mine and when I put in a card (sd/cf/smart,etc..) and boot knoppix live it makes it plug-and-play and treats the media like a normal hard drive.Makes it easy to move files between the camera and debian just by swaping the card.The reader was about 30bucks.

Not what your looking for by a possiable solution.

[aay]

I just bought a usb 6-n-1 card reader for mine and when I put in a card (sd/cf/smart,etc..) and boot knoppix live it makes it plug-and-play and treats the media like a normal hard drive.Makes it easy to move files between the camera and debian just by swaping the card.The reader was about 30bucks.

Not what your looking for by a possiable solution.

Yes this is a good solution. I bought a small little reader and am quite happy with it.

On the other hand try running gtkam and see if it detects your camera. You may want to consult the gtkam website to see if your camera is supported.

[rickenbacherus]

I have had much success simply mounting my Toshiba as /dev/sda1.

[CivilEng]

YES- I mount my Fuji FinePix 1400Zoom by editing the /etc/fstab file:

# This will add support for a USB camera to be mounted as a removable media
/dev/sda1 /mnt/XXXX auto noauto,user,rw 0

Remember to create the directory XXXX (can be any name) under /mnt (You can also make this any directory, anywhere.

Good Luck,

Civ

[aay]

YES- I mount my Fuji FinePix 1400Zoom by editing the /etc/fstab file:

# This will add support for a USB camera to be mounted as a removable media
/dev/sda1 /mnt/XXXX auto noauto,user,rw 0

Remember to create the directory XXXX (can be any name) under /mnt (You can also make this any directory, anywhere.

Good Luck,

Civ

Yes some cameras will work like this because they function as a generic usb hard drive (not mine), but this will certainly not work with all cameras. Perhaps not even the majority. Fortunately for you it appears that your model can be treated as a simple usb hard drive. I discovered this by looking at the links below. Check them out and you should be able to get your camera working. The fist link shows which cameras us the usb mass storage device driver. The second one is more suited to your casio.

http://www.teaser.fr/~hfiguiere/linux/digicam.html
http://www.harald-schreiber.de/

For reference the gphoto2 page is also quite helpful.

[tweety77]

Thanks for the fast help. Mounting my camera as a removable media works fine.

Thanks a lot.
Stefan

[bikerpaul68]

# This will add support for a USB camera to be mounted as a removable media
/dev/sda1 /mnt/XXXX auto noauto,user,rw 0

I tried the change to fstab but I get "/dev/sda1 is not a valid block
device".

What am I doing wring?

TIA

Paul

[sakiZ]

Try /dev/sdb1

instead of /dev/sda1

This assumes that you already assigned a device to /dev/sda1 so we move to the next available: sdb1


Play with it if you have more than two devices like this.


sakiZ

[OErjan]

if you issue the coimand below in a console the information displayed

dmesg|grep sd

might help you solve the puzzle.