I got a new external crucial X8 usb 3.0 ssd and it reports a very large blocksize.
Unfortunately, it seems to make playing videos over the network with samba have problems. It may also be suboptimal using it on a usb 2.0 port.
blockdev --report
shows most drives have 256 sector readahead
RO RA SSZ BSZ StartSec Size Device
ro 256 512 1024 0 205111296 /dev/loop0
ro 256 512 1024 0 204873728 /dev/loop1
ro 256 512 1024 0 4096 /dev/loop2
ro 256 512 1024 0 157855744 /dev/loop3
however, my crucial ssd gets a giant 131072 readahead value. I believe this is what's causing the problems with the network drive sharing.
sudo blockdev --setra 16384 /dev/sdb
sets it to a much better value and I don't see the audio dropouts.
You can also check the value by getting the readahead for a specific drive.
blockdev --getra /dev/sdb

Dell 6P85J 4TB ST4000NM0063 7.2k 6Gb/s 3.5” SAS SED Hard Drive with Tray
$39.99
Western Digital HUS726T4TAL5204 4TB 7.2K SAS 12Gb/s 3.5" 512e HDD NetApp X375A
$64.00
DELL 2TB Enterprise HDD (7200RPM, 3.5", SATA III, 128MB Cache) HUS722T2TALA600
$49.95
(ST8000NM0045) SEAGATE ENTERPRISE 8TB 7200RPM 4Kn SATA 6Gb/s 3.5" HARD DRIVE
$199.99
Seagate ST4000NM0034 Enterprise 4TB 7200RPM SAS 12Gb/s HDD v4
$39.00
Seagate ST500DM009 BarraCuda 500 GB 3.5" SATA III Desktop Hard Drive
$14.99
HGST HUS726060ALE610 0F23001 6TB HDD 3.5" SATA 6Gb/s 7.2K Hard Drive (V6315)
$69.95
Dell ST6000NM0034 1HT27Z-150 NWCCG 6TB SAS 3.5 7.2K ENTERPRISE SERVER DRIVE
$68.99
Seagate ST8000NM0075 Enterprise Capacity 3.5 HDD 8TB SAS Hard Drive 8TB EXOS
$184.99
Western Digital 2TB WD20EFRX-68EUZN0 3.5" SATA Red NAS Hard Disk Drive
$69.99