Running knoppix 3.2 from the cd, I don't configure wine. In kde, I just click on my windows partition icon, browse to notepad.exe, right click on it, and wine will set up and run it in a few moments.
I just got Knoppix 3.3 installed and was trying to configure Wine (20030813). After a configured the config file and run Notepad to test the settings i got some error messages about not having persions to certain drives. What is wrong? This was the output:
-----------------
Warning: Language 'us' was not recognized, defaulting to English
err:dosfs:DRIVE_ReadSuperblock Couldn't open device '/dev/fd0' for drive A: ! (no permission)
err:dosfs:DRIVE_ReadSuperblock Can't read drive volume info ! Either pre-set it or make sure the device to read it from is accessible !
Perhaps you have not properly edited or created your Wine configuration file,
which is (supposed to be) '/home/user/.wine/config'.
err:dosfs:DRIVE_GetLabel Invalid or unreadable superblock on /dev/fd0 (A:).
err:dosfs:DRIVE_ReadSuperblock Couldn't open device '/dev/fd0' for drive A: ! (no permission)
err:dosfs:DRIVE_ReadSuperblock Can't read drive volume info ! Either pre-set it or make sure the device to read it from is accessible !
Perhaps you have not properly edited or created your Wine configuration file,
which is (supposed to be) '/home/user/.wine/config'.
Invalid or unreadable superblock on /dev/fd0 (A:). Maybe not FAT?
fixme:cdrom:CDROM_Open Can't open configured CD-ROM drive at M:\ (device /dev/scd0): Permission denied
fixme:cdrom:CDROM_GetStatusCode Unmapped error code 9: Bad file descriptor
fixme:cdrom:CDROM_Open Can't open configured CD-ROM drive at N:\ (device /dev/scd0): Permission denied
fixme:cdrom:CDROM_GetStatusCode Unmapped error code 9: Bad file descriptor
fixme:cdrom:CDROM_Open Can't open configured CD-ROM drive at O:\ (device /dev/scd0): Permission denied
fixme:cdrom:CDROM_GetStatusCode Unmapped error code 9: Bad file descriptor
fixme:cdrom:CDROM_Open Can't open configured CD-ROM drive at P:\ (device /dev/scd1): Permission denied
fixme:cdrom:CDROM_GetStatusCode Unmapped error code 9: Bad file descriptor
fixme:shell:ShellView_OnNotify -- 0x4042dc78 WM_COMMAND ffffff98 unhandled
fixme:commdlg:SendCustomDlgNotificationMessage sending OPENFILENAMEA structure. Hook is expecting OPENFILENAMEW!
fixme:commdlg:SendCustomDlgNotificationMessage sending OPENFILENAMEA structure. Hook is expecting OPENFILENAMEW!
fixme:commdlg:SendCustomDlgNotificationMessage sending OPENFILENAMEA structure. Hook is expecting OPENFILENAMEW!
fixme:shell:ShellView_OnNotify -- 0x4042dc78 WM_COMMAND fffffff4 unhandled
fixme:shell:ShellView_OnNotify -- 0x4042dc78 WM_COMMAND ffffff98 unhandled
------
Anyone?!?! Thanks
Running knoppix 3.2 from the cd, I don't configure wine. In kde, I just click on my windows partition icon, browse to notepad.exe, right click on it, and wine will set up and run it in a few moments.
Ok, but i donīt have a windows partition. I run Wine from the terminal. The first time i tried it notified me that Wine was not configured yet and if i would like to do it now, so i did.

74Y6511 IBM 3Gb 2 Port PCI-E x8 SAS RAID Adapter 74Y6512 44V4199 W/ 1x Battery
$99.99
Broadcom MegaRAID 9480-8e Fujitsu PRAID EP540e SAS RAID Card (Replac 9380-8e) 8i
$228.00
EMC KTN-SL3 15-Bay Disk Array Enclosure w/2x 303-108-000E Cards, Dual PSU,No HDD
$239.99
G-Technology G-SPEED Studio XL 48TB Thunderbolt 2 Storage - Housing Only
$200.00
Dell PowerEdge HBA330 LP PCI-E 12GBs RAID SAS Controller Adapter J7TNV
$18.95
Broadcom LSI 9305-16i 12Gbps SAS-3 PCIe x8 HBA 16-Ports Raid Controller
$64.99
OWC Mercury Elite Pro 2 Bay RAID Enclosure with USB 3.2 for Dual 3.5 inch HDDs
$87.99
OWC ThunderBay 4 Four-Bay Thunderbolt (40Gb/s) External Storage Enclosure With
$639.99
Areca ARC-1882IX-24 (16i4e)24-Port RAID Controller Card w/BBU /HDD Monitor Board
$300.00
Intel VROC Premium RAID Controller Card PCIe Add-On Module VROCPREMMOD
$265.00