Running knoppix 3.2 from the cd, I don't configure wine. In kde, I just click on my windows partition icon, browse to notepad.exe, right click on it, and wine will set up and run it in a few moments.
I just got Knoppix 3.3 installed and was trying to configure Wine (20030813). After a configured the config file and run Notepad to test the settings i got some error messages about not having persions to certain drives. What is wrong? This was the output:
-----------------
Warning: Language 'us' was not recognized, defaulting to English
err:dosfs:DRIVE_ReadSuperblock Couldn't open device '/dev/fd0' for drive A: ! (no permission)
err:dosfs:DRIVE_ReadSuperblock Can't read drive volume info ! Either pre-set it or make sure the device to read it from is accessible !
Perhaps you have not properly edited or created your Wine configuration file,
which is (supposed to be) '/home/user/.wine/config'.
err:dosfs:DRIVE_GetLabel Invalid or unreadable superblock on /dev/fd0 (A:).
err:dosfs:DRIVE_ReadSuperblock Couldn't open device '/dev/fd0' for drive A: ! (no permission)
err:dosfs:DRIVE_ReadSuperblock Can't read drive volume info ! Either pre-set it or make sure the device to read it from is accessible !
Perhaps you have not properly edited or created your Wine configuration file,
which is (supposed to be) '/home/user/.wine/config'.
Invalid or unreadable superblock on /dev/fd0 (A:). Maybe not FAT?
fixme:cdrom:CDROM_Open Can't open configured CD-ROM drive at M:\ (device /dev/scd0): Permission denied
fixme:cdrom:CDROM_GetStatusCode Unmapped error code 9: Bad file descriptor
fixme:cdrom:CDROM_Open Can't open configured CD-ROM drive at N:\ (device /dev/scd0): Permission denied
fixme:cdrom:CDROM_GetStatusCode Unmapped error code 9: Bad file descriptor
fixme:cdrom:CDROM_Open Can't open configured CD-ROM drive at O:\ (device /dev/scd0): Permission denied
fixme:cdrom:CDROM_GetStatusCode Unmapped error code 9: Bad file descriptor
fixme:cdrom:CDROM_Open Can't open configured CD-ROM drive at P:\ (device /dev/scd1): Permission denied
fixme:cdrom:CDROM_GetStatusCode Unmapped error code 9: Bad file descriptor
fixme:shell:ShellView_OnNotify -- 0x4042dc78 WM_COMMAND ffffff98 unhandled
fixme:commdlg:SendCustomDlgNotificationMessage sending OPENFILENAMEA structure. Hook is expecting OPENFILENAMEW!
fixme:commdlg:SendCustomDlgNotificationMessage sending OPENFILENAMEA structure. Hook is expecting OPENFILENAMEW!
fixme:commdlg:SendCustomDlgNotificationMessage sending OPENFILENAMEA structure. Hook is expecting OPENFILENAMEW!
fixme:shell:ShellView_OnNotify -- 0x4042dc78 WM_COMMAND fffffff4 unhandled
fixme:shell:ShellView_OnNotify -- 0x4042dc78 WM_COMMAND ffffff98 unhandled
------
Anyone?!?! Thanks
Running knoppix 3.2 from the cd, I don't configure wine. In kde, I just click on my windows partition icon, browse to notepad.exe, right click on it, and wine will set up and run it in a few moments.
Ok, but i don΄t have a windows partition. I run Wine from the terminal. The first time i tried it notified me that Wine was not configured yet and if i would like to do it now, so i did.

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00
Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD
$119.99
Dell PowerEdge M640 Blade Barebone Server Dell P/N: HHB006 Tested Working
$149.99
NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 4 NODE SERVER
$1499.97
Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 2.8ghz 20-Cores | 128GB
$149.99
Dell Poweredge C6400 24x 2.5ββ 2x 2400W 4x C6420 Nodes H330 | 2x SFP | 8x Trays
$799.99
LOT (8) Cisco UCS UCSB-B200-M5 2x6248R 24 core 3.0G 24x64g DDR4-2933 ram
$112000.00
Cisco B200 M3 2x E5-2670V2 10 Core 8x 16GB-128GB Ram Blade Server VIC1240 14900R
$399.00
Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR
$96.60
Dell Poweredge VRTX 25Bay 2.5" 2x PERC 8, 2xCMC, I/O 1GB Pass Through, 4x PS
$578.08