Results 1 to 10 of 10

Thread: Toshiba Notebook Display too small

  1. #1
    Junior Member
    Join Date
    Dec 2003
    Posts
    4

    Toshiba Notebook Display too small

    I ran Koppix from the CD on my Tosibia 650mhz Celaron and the windows are small, and xchat, for example is small and centered in the middle of the screen, I can not make it any bigger...

    any suggestions?

  2. #2
    Junior Member registered user
    Join Date
    Dec 2003
    Posts
    27
    Hi, I run into the same thing everytime I run knoppix from cd, to solve this problem you have to get knoppix to use vesa as its video mode. I'm not sure how to do that, search the site. But since I have knoppix installed on my hd, vesa mode takes up the whole screen. It would be nice if 1440x900 video res. was supported as my monitor is 17inch wide screen on a toshiba laptop.

  3. #3
    Senior Member registered user
    Join Date
    Mar 2003
    Posts
    872
    talking about vesa, I learnt a nice little trick from spblinux's author. One can use mplayer to query what vesa mode is supported by the display chip by :

    mplayer -v some_video_file > log

    the log would contain all the available one for the vga= parameter. Though it is listed in hex and somehow 512(decimal) is needed to be added to the value to come out the proper vga= value.

    So one can always boot with vga=normal and fine out what vesa modes is there then later fix that in the boot configure in LILO/GRUB for future use, should vesa is needed.

  4. #4
    Junior Member
    Join Date
    Dec 2003
    Posts
    4
    Ah ok..
    Though I still do not know how to run Versa.

    What command do I need to run at the "boot" command to get it to get it to work?

  5. #5
    Senior Member registered user
    Join Date
    Feb 2003
    Location
    Nova Scotia, Canada
    Posts
    2,479
    Quote Originally Posted by Kamakize
    Ah ok..
    Though I still do not know how to run Versa.

    What command do I need to run at the "boot" command to get it to get it to work?
    Try using the frame buffer when you boot with fb1024x768 at the prompt.

  6. #6
    Junior Member
    Join Date
    Dec 2003
    Posts
    4
    How the heck do I do this?

    SOmeone giove me what I should do at boot.

    Thanks!

  7. #7
    Junior Member registered user
    Join Date
    Dec 2003
    Posts
    27
    Press f2 at boot prompt and look at the knoppix cheats on top

  8. #8
    Junior Member
    Join Date
    Dec 2003
    Posts
    4
    Still No luck. I have tried to do screen= , i tired expert, tried dont detect monitor.. still disaplays just in the center of the screen...

  9. #9
    Senior Member registered user
    Join Date
    Mar 2003
    Posts
    555
    try "knoppix xserver=XFree86 xmodule=fbdev fb1024x768"

  10. #10
    Senior Member registered user
    Join Date
    Feb 2003
    Location
    Nova Scotia, Canada
    Posts
    2,479
    Quote Originally Posted by baldyeti
    try "knoppix xserver=XFree86 xmodule=fbdev fb1024x768"
    The knoppix at the start is not needed the fb1024x768 is a kernel image just like the knoppix the correct line would be:
    Code:
    fb1024x768 cheat_code cheat_code .....

Similar Threads

  1. Knoppix on an old Notebook
    By pschuett in forum Hardware & Booting
    Replies: 1
    Last Post: 02-25-2005, 04:07 PM
  2. Notebook and Beamer
    By the_viper in forum Laptops
    Replies: 0
    Last Post: 01-06-2005, 07:56 PM
  3. Old Notebook Display Problems
    By merlin232 in forum Laptops
    Replies: 6
    Last Post: 09-24-2004, 04:51 PM
  4. Replies: 14
    Last Post: 08-08-2003, 07:21 PM
  5. Display Problems with Gateway Notebook
    By Chris Ruhl in forum Hardware & Booting
    Replies: 3
    Last Post: 03-01-2003, 02:57 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell EMC PowerEdge R740 8 Bay Server w/ 32GB RAM 2x GOLD 6132 2x 1600W PSU H730p picture

Dell EMC PowerEdge R740 8 Bay Server w/ 32GB RAM 2x GOLD 6132 2x 1600W PSU H730p

$499.88



Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram  2x 550W PSU No HDD picture

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD

$275.00



Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb picture

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb

$374.99



Dell Poweredge R620 10x 2.5

Dell Poweredge R620 10x 2.5" bay with 256GB (16x16gb) DDR3, 2x E5-2690v2, H710

$349.99



Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD picture

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD

$378.93



Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W picture

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W

$409.99



Dell PowerEdge R640  8xSFF Server Barebone 2 x Heat Sink w / 2x 1100W PSU picture

Dell PowerEdge R640 8xSFF Server Barebone 2 x Heat Sink w / 2x 1100W PSU

$315.00



Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD picture

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD

$149.99



Dell EMC VxRail E560F 10-SFF 2*Gold 6230R 2.1GHz No RAM HBA330 iDrac Ent Server picture

Dell EMC VxRail E560F 10-SFF 2*Gold 6230R 2.1GHz No RAM HBA330 iDrac Ent Server

$349.99



Dell Poweredge C4130 2x LGA2011-3 1U 4x GPU Rackmount Server CTO (NO CPU/NO RAM) picture

Dell Poweredge C4130 2x LGA2011-3 1U 4x GPU Rackmount Server CTO (NO CPU/NO RAM)

$299.95