mobility m10?

[TheCrazzyman]

ok i installed knoppix to my harddrive debian stle, now as you can see its not showing my radeon 9600pro, why? also i still cant change my reslution
ive tryed kxconfig and the settings dont seem to stick. its and using a OS at 640x480 sucks.
Thank You



[code] 00:00.0 Host bridge: Intel Corp.: Unknown device 2570 (rev 02)
Subsystem: CLEVO/KAPOK Computer: Unknown device 0500
Flags: bus master, fast devsel, latency 0
Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [e4] #09 [2106]
Capabilities: [a0] AGP version 3.0

00:01.0 PCI bridge: Intel Corp.: Unknown device 2571 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 96
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e8100000-e81fffff
Prefetchable memory behind bridge: f0000000-f7ffffff

00:1d.0 USB Controller: Intel Corp.: Unknown device 24d2 (rev 02) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer: Unknown device 0500
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 1cc0 [size=32]

00:1d.1 USB Controller: Intel Corp.: Unknown device 24d4 (rev 02) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer: Unknown device 0500
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 1ce0 [size=32]

00:1d.2 USB Controller: Intel Corp.: Unknown device 24d7 (rev 02) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer: Unknown device 0500
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 2000 [size=32]

00:1d.3 USB Controller: Intel Corp.: Unknown device 24de (rev 02) (prog-if 00 [UHCI])
Subsystem: CLEVO/KAPOK Computer: Unknown device 0500
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 2020 [size=32]

00:1d.7 USB Controller: Intel Corp.: Unknown device 24dd (rev 02) (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer: Unknown device 0500
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at e8000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [20a0]

00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev c2) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 00004000-00004fff
Memory behind bridge: e8200000-e82fffff

00:1f.0 ISA bridge: Intel Corp.: Unknown device 24d0 (rev 02)
Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corp.: Unknown device 24db (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: CLEVO/KAPOK Computer: Unknown device 0500
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at 2060 [size=16]
Memory at 20000000 (32-bit, non-prefetchable) [size=1K]

00:1f.3 SMBus: Intel Corp.: Unknown device 24d3 (rev 02)
Subsystem: CLEVO/KAPOK Computer: Unknown device 0500
Flags: medium devsel, IRQ 17
I/O ports at 2040 [size=32]

00:1f.5 Multimedia audio controller: Intel Corp.: Unknown device 24d5 (rev 02)
Subsystem: CLEVO/KAPOK Computer: Unknown device 0800
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at 1400 [size=256]
I/O ports at 1c80 [size=64]
Memory at e8000c00 (32-bit, non-prefetchable) [size=512]
Memory at e8000800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2

00:1f.6 Modem: Intel Corp.: Unknown device 24d6 (rev 02) (prog-if 00 [Generic])
Subsystem: CLEVO/KAPOK Computer: Unknown device 0800
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at 1800 [size=256]
I/O ports at 1c00 [size=128]
Capabilities: [50] Power Management version 2

01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 4e50 (prog-if 00 [VGA])
Subsystem: CLEVO/KAPOK Computer: Unknown device 0500
Flags: bus master, fast Back2Back, 66Mhz, medium devsel, latency 66, IRQ 17
Memory at f0000000 (32-bit, prefetchable) [size=128M]
I/O ports at 3000 [size=256]
Memory at e8100000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [58] AGP version 3.0
Capabilities: [50] Power Management version 2

03:00.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller
Subsystem: CLEVO/KAPOK Computer: Unknown device 0500
Flags: bus master, medium devsel, latency 168
Memory at 20001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
Memory window 0: 20400000-207ff000 (prefetchable)
Memory window 1: 20800000-20bff000
I/O window 0: 00004400-000044ff
I/O window 1: 00004800-000048ff
16-bit legacy interface ports at 0001

03:01.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: CLEVO/KAPOK Computer: Unknown device 0500
Flags: bus master, medium devsel, latency 32, IRQ 21
Memory at e8204000 (32-bit, non-prefetchable) [size=2K]
Memory at e8200000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2

03:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 (rev 10)
Subsystem: CLEVO/KAPOK Computer: Unknown device 0500
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 22
I/O ports at 4000 [size=256]
Memory at e8204800 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 2

[turbinater]

ok i installed knoppix to my harddrive debian stle, now as you can see its not showing my radeon 9600pro, why? also i still cant change my reslution
ive tryed kxconfig and the settings dont seem to stick. its and using a OS at 640x480 sucks.

You're obviously using an earlier version of knoppix 3.3, perhaps V3.3 2003-09-22. Open /etc/X11/XF86Config-4 and see what video modes are there. Be prepared, you may have to add video modes manually. Also, check the video driver being used. It may be ati, you want it to be radeon.

Is your motherboard a newer one? Some newer boards aren't supperted very well yet.

Double check your spelling and grammer; you will get far better replies.