-
Junior Member
registered user
rickenbacherus...thank you for all of your help
rick i sincerely appreciate your patience and helpfulness, i have pushed my luck with this forum, and especially you, you have been a saint. i know it must get annoying if u feel you are answering questions for someone too lazy to get the info themselves. i assure you my friend, that is not the case with me. i am used to having to spend twice the time searching and reading, so when i came here it sort of spoiled me, but i also know the value of learning on my own, and using guys like you on an as needed basis, in the long run it is a much more comprehendable knowledge to learn in that manner, (as i am certain you are aware) so i am off to hunt and read, i really would like to thank u again for all of your help and anxiously anticipate my return to this forum in the near future, with the ability to actually carry on a conversation about knoppix
-
Junior Member
registered user
I'll absolutely second that - this forum is incredible, like the Knoppix community in general (for all even barely conversant in German, the German forum will also offer the best help imaginable). Thank you to all you experienced users for your patience and generosity with your time!!! Apart from Mr Knopper's great work, it's you people who make Knoppix really accessible to us newbies.
-
Hi
(for all even barely conversant in German, the German forum will also offer the best help imaginable)
If you have a _very_special_ question that could not be answered here don't hesitate to ask the german forum, also in english.
Ciao Martin
-
Senior Member
registered user
Re: rickenbacherus...thank you for all of your help

Originally Posted by
nachral
rick i sincerely appreciate your patience and helpfulness, i have pushed my luck with this forum, and especially you, you have been a saint. i know it must get annoying if u feel you are answering questions for someone too lazy to get the info themselves. i assure you my friend, that is not the case with me. i am used to having to spend twice the time searching and reading, so when i came here it sort of spoiled me, but i also know the value of learning on my own, and using guys like you on an as needed basis, in the long run it is a much more comprehendable knowledge to learn in that manner, (as i am certain you are aware) so i am off to hunt and read, i really would like to thank u again for all of your help and anxiously anticipate my return to this forum in the near future, with the ability to actually carry on a conversation about knoppix
Glad to help. I have posted more than my own share of questions in other forums.
I don't worry too much about people not searching- if it's obvious they didn't even try I usually just ignore the question.
Similar Threads
-
By Cuddles in forum General Support
Replies: 9
Last Post: 12-30-2003, 03:07 AM
-
By Doc in forum The Lounge
Replies: 2
Last Post: 06-26-2003, 01:11 AM
-
By tsaelee in forum Hardware & Booting
Replies: 19
Last Post: 03-28-2003, 11:26 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

(2) Seagate SAS Hard Drive Exos 7E8 3TB 7200RPM 128MB 12Gb/s 3.5 ST3000NM0035
$49.99

Dell EMC WD-HITACHI H5H72101CLAR10T0 10TB 7.2K SAS 12Gb/s SED 3.5in A POH 0-50k
$189.99

Seagate BarraCuda ST3000DM008 3TB Internal SATA 6Gb 3.5" Hard Drive 7200RPM 64MB
$91.99

WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$329.99

Seagate ST500DM009 BarraCuda 500 GB 3.5" SATA III Desktop Hard Drive
$14.99

Toshiba MG04ACA400 4TB 3.5-inch SATA 6 Gb/s 7,200 RPM Internal Hard Drive
$49.99

Seagate ST28000NM001C 28TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$669.99

Toshiba 14TB MG07 MG07ACA14TEY 7.2K RPM SATA 6Gb/s 512e 3.5" Enterprise HDD
$299.00

Seagate 6TB HDD ST6000NM0034 7.2K 3.5" SAS 12Gb/s (NOT FOR PC - FOR SERVER ONLY)
$87.00

HDD 3.5" SATA Hard Drive with Windows 10/Win 11 64x Installed Legacy
$35.00