In first place thks for your quick reply.

I did what you told me and appears the following > Warning : compact may conflict with LBA32 on some systems
Added Linux
Added Windows


This is my lilo.conf file :


lba32
# Generated by liloconfig

# Specifies the boot device
boot=/dev/hda3

# Specifies the device that should be mounted as root.
# If the special name CURRENT is used, the root device is set to the
# device on which the root file system is currently mounted. If the root
# has been changed with -r , the respective device is used. If the
# variable ROOT is omitted, the root device setting contained in the
# kernel image is used. It can be changed with the rdev program.
root=/dev/hda3

# Enables map compaction:
# Tries to merge read requests for adjacent sectors into a single
# read request. This drastically reduces load time and keeps the map
# smaller. Using COMPACT is especially recommended when booting from a
# floppy disk.
compact

# Install the specified file as the new boot sector.
# If INSTALL is omitted, /boot/boot.b is used as the default.
install=/boot/boot.b

# Specifies the number of _tenths_ of a second LILO should
# wait before booting the first image. LILO
# doesn't wait if DELAY is omitted or if DELAY is set to zero.
delay=20

# Specifies the location of the map file. If MAP is
# omitted, a file /boot/map is used.

map=/boot/map

# Specifies the VGA text mode that should be selected when
# booting. The following values are recognized (case is ignored):
# NORMAL select normal 80x25 text mode.
# EXTENDED select 80x50 text mode. The word EXTENDED can be
# abbreviated to EXT.
# ASK stop and ask for user input (at boot time).
# <number> use the corresponding text mode. A list of available modes
# can be obtained by booting with vga=ask and pressing [Enter].
vga=normal

image=/vmlinuz
label=Linux
read-only

# If you have another OS on this machine (say DOS),
# you can boot if by uncommenting the following lines
# (Of course, change /dev/hda2 to wherever your DOS partition is.)
other=/dev/hda1
label=Windows



Thks for the help.