Results 1 to 3 of 3

Thread: knoppix guru needed!!

  1. #1
    Junior Member registered user
    Join Date
    Dec 2003
    Location
    au
    Posts
    22

    knoppix guru needed!!

    ok guys , i found this on the web & i thourght it might creat a bit of interest so have a read and se what you think

    An old laptop of mine fubared its Linux partition beyond (easy) repair so I decided a clean install was the way to go. When I went to install a recent Debian system I had trouble with PCMCIA under the 2.2 kernel, and XFree gave me a blank screen under 2.4. Knoppix, however, made everything work automagically (with the exception of sound).



    I thought for a minute... hmmm... I can compile a custom kernel for the box as I had always done in the past, or I can simply copy the Knoppix CD-ROM with its compressed filesystem onto the hard disk. Since the box has only 1.5 GB of disk available, things have always been a tight squeeze, but with Knoppix I would get a pretty complete install in only 700 megs, albeit with the cost of some speed to decompress applications on startup.

    So I gave it a shot, and sure enough, it worked pretty darn well.

    The only problem was the lack of persistent configuration. Knoppix supposedly has some tools that will allow you to save configuration info, but I haven't played with them yet. But it is pretty trivial to write a script to tweak things after the fact.

    The only "problem" with Knoppix is that the CD-ROM is updated every few weeks and that there is no way to download just the changes -- the complete ISO image must be downloaded for each upgrade.

    In any case, getting a compressed Knoppix to run from your HD is as simple as the following:

    Copy the contents of the CD-ROM to your hard disk. I created a 750 meg partition for this, but strictly speaking I'm not sure this is necessary. (Knoppix seems to scan for its compressed disk image, so you might be able to stash that anywhere)
    Mount the boot.img file via a loop mount point to copy off the kernel and initrd files.
    Configure grub or lilo to boot with these. You'll probably want to specify some boot options, at the very least, changing from the default German keyboard and language.
    Reboot. Then magic happens.

    This is, without a doubt, the quickest and easiest O/S install I have ever performed, and the "magic" part is that it was on an old laptop with such a small hard drive it would be almost impossible to make any other full-featured Linux distro and a full set of useful applications work on it.

    this was writen buy this guy[email protected]

    it would be interesting to see a knx distro that auto installed like this as you could then have a 1.7gig install on a 750 meg capacity drive

  2. #2
    Senior Member registered user
    Join Date
    Feb 2003
    Location
    Nova Scotia, Canada
    Posts
    2,479

    Re: knoppix guru needed!!

    Quote Originally Posted by gyro

    it would be interesting to see a knx distro that auto installed like this as you could then have a 1.7gig install on a 750 meg capacity drive
    Sounds a lot like the tohd cheat code.

  3. #3
    Junior Member registered user
    Join Date
    Dec 2003
    Location
    au
    Posts
    22
    THANX MAN I WASNT AWARE OF THAT ONE ILL TRY IT AND SEE IF IT GIVES THE SAME RESULT

Similar Threads

  1. Mounting a USB key. IDEA for some real smart Knoppix guru
    By braverma_jom in forum MS Windows & New to Linux
    Replies: 8
    Last Post: 03-21-2005, 04:52 AM
  2. Knoppix 3.3 file needed
    By tempestuous in forum General Support
    Replies: 5
    Last Post: 01-04-2005, 10:50 AM
  3. Natsemi internet connectivity problem, Guru needed :)
    By unclebulgaria in forum General Support
    Replies: 4
    Last Post: 10-17-2003, 07:01 PM
  4. Is there any Init Guru is the place ?
    By smurfy__ in forum Customising & Remastering
    Replies: 1
    Last Post: 08-18-2003, 01:40 PM
  5. Knoppix guru needed
    By linux-noob in forum Customising & Remastering
    Replies: 10
    Last Post: 07-30-2003, 05:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


OPNsense pfSense 8-Core Atom C3758 2.2GHz 8GB DDR4 64GB SSD 8x NIC QAT AES VPN picture

OPNsense pfSense 8-Core Atom C3758 2.2GHz 8GB DDR4 64GB SSD 8x NIC QAT AES VPN

$145.00



pfSense Firewall 16-Core Atom C3958 8GB DDR4 RAM 64GB SSD 8x 1Gbe QAT AES-NI VPN picture

pfSense Firewall 16-Core Atom C3958 8GB DDR4 RAM 64GB SSD 8x 1Gbe QAT AES-NI VPN

$184.99



OPNsense pfSense 16-Core Atom C3958 16GB ECC RAM 512GB SSD 8-Port QAT AES-NI VPN picture

OPNsense pfSense 16-Core Atom C3958 16GB ECC RAM 512GB SSD 8-Port QAT AES-NI VPN

$248.00



SonicWall TZ280 Firewall 03-SSC-6933 Advanced Edition 3YR NEW SEALED picture

SonicWall TZ280 Firewall 03-SSC-6933 Advanced Edition 3YR NEW SEALED

$999.99



Fortinet FortiGate 60F FG-60F Firewall Tested Reset Deregistered OEM PSU picture

Fortinet FortiGate 60F FG-60F Firewall Tested Reset Deregistered OEM PSU

$99.99



Fortinet FortiGate 60F FG-60F P24286-03-13 Network Firewall Security Appliance picture

Fortinet FortiGate 60F FG-60F P24286-03-13 Network Firewall Security Appliance

$155.75



Firewalla Gold Pro 10GbE Firewall Router with Rack Mount Ears and USB Key picture

Firewalla Gold Pro 10GbE Firewall Router with Rack Mount Ears and USB Key

$829.99



Firewalla Gold Pro - 10 Gbps Cyber Security Firewall picture

Firewalla Gold Pro - 10 Gbps Cyber Security Firewall

$693.00



Cisco Meraki MX67-HW Security Appliance Firewall NEW Unused Unclaimed picture

Cisco Meraki MX67-HW Security Appliance Firewall NEW Unused Unclaimed

$202.50



Zero Trace Pen: All-in-one Tor Network Anonymous Drive + Cryptocurrency Wallet picture

Zero Trace Pen: All-in-one Tor Network Anonymous Drive + Cryptocurrency Wallet

$147.00